Browsing Posts of Author »admin2
March 17th ,
2012 →
3:14 pm
@
admin2
A fully illuminated power-rated rocker switch that is sealed to IP66 ratings WITHOUT THE BOOT! No rubber boot / PVC cap is needed. It uses a patented sealing technology (patent no. US 7,872,205 B2) to provide protection from dust and water, all while offering full illumination in a 22mm × 30mm panel cutout. Electrical rating: [...]
Category :
Engineers Solutions Articles / Switches & Relays / Technical Articles
March 16th ,
2012 →
3:41 pm
@
admin2
State of the art technology assuring precise, unambiguous readings, makes leak finding across a wide variety of refrigerants easy and quick. It precisely pinpoints a place of the leaks of the refrigerant in air-conditioning systems. The sensor detects halogenated refrigerants such as R-134a, R-404A, R-407C, R-410A, R-22, Freon, etc. A suction pump provides instant response [...]
Category :
Engineers Solutions Articles / Production Tools Equipment and Supplies / Technical Articles
March 16th ,
2012 →
3:41 pm
@
admin2
These IP67 rated connectors are available in three configurations; D-Sub Backshell Kit, D-Sub Panel Mount Connector, and D-Sub Connector Cap. Features & Benefits: *rear mounting panel connectors fit into standard D-Sub holes. *Connectors are available in solder cup, male and female version. *Gold plated contacts are standard. *Backshell kits available for cable diameters 0.138 – [...]
Category :
Engineers Solutions Articles / Interconnect Products / Technical Articles
March 16th ,
2012 →
3:41 pm
@
admin2
Universal Input 100 – 240 VAC * Medical Approvals * Internal EMI Filter * Single Output * Output Voltage Available from 5VDC – 36VDC * Input Surge Current Protection * Over-Current Protection * Over- Voltage Protection * 100% Burn-In* Class I * 2” × 4” Design. EMI Requirement – Meets Condition Limits of: CISPR-11 Class [...]
Category :
Engineers Solutions Articles / Power Supplies, Batteries & Accessories / Technical Articles
March 16th ,
2012 →
3:41 pm
@
admin2
These circuit breakers are ideally suited for the rigors and confined spaces found in today’s telecom/datacom power distribution units and rack systems. Features include: *ultra low profile design saves valuable space. *Optional handle guard actuator. *UL 489 LISTED Branch Circuit breaker. *Designed for worldwide datacenter compatibility with up to 240VAC ratings. *Available in 1 to [...]
Category :
Engineers Solutions Articles / Heat & Circuit Protection / Technical Articles
March 16th ,
2012 →
3:41 pm
@
admin2
These filters offer improved performance, reliability and efficiency. The new sine wave filters are designed to convert output voltage wave forms, produced by PWM (Pulse Width Modulation) frequency converters into low distortion sine wave forms. Designed for motor and power transformation applications, the filters increased efficiency and life of the motor. These sine wave filters [...]
Category :
EMI/Filters / Engineers Solutions Articles / Technical Articles
March 16th ,
2012 →
3:41 pm
@
admin2
This system enables pluggable copper or optical options, thereby increasing the flexibility of system-level hardware for end users. This system was adopted by IEEE 802.3ba, as the 100G Ethernet standard, providing 10 lanes of 10 Gbps data rates. The front elastomeric gasket and electromagnetic interference (EMI) protection fingers provide optimized EMI protection to face plate. [...]
Category :
Engineers Solutions Articles / Interconnect Products / Technical Articles
March 16th ,
2012 →
1:28 pm
@
admin2
Modern industrial, commercial, and residential life depend on the availability of electricity. The electricity supplied must be at a level of quality to facilitate efficient performance of today’s sensitive electronic equipment. Our dependence on electricity and the prevalence of more and more sensitive electronics make a reliable source of high quality power essential to modern [...]
Category :
Engineering and Technical White Papers / White Papers
March 2nd ,
2012 →
6:27 pm
@
admin2
Transipillar Spacers for Board-to-Board and Board-to-Chasis Mounting Transipillars, also known as spacers or standoffs, are made of studs and inserts molded in a nylon body. The transipillars, short for transitional pillars, provide a durable insulated spacer system for board-to-board stacking or board-to-chassis mounting. The combination of various lengths and metric thread sizes provides an exstensive [...]
Category :
Heat & Circuit Protection / Product Releases / Schurter
February 28th ,
2012 →
6:39 pm
@
admin2
DEE has developed a White Paper Report as a result of analysis and observations and data with respect to the activities and effectiveness of the RFQ outcomes for many of our manufacturer clients. Specifically, in this paper, we identify critically important tactics that are rarely ever done on RFQs by manufacturers — but should be, to achieve [...]
Category :
Purchasing / Materials Management Whitepapers / Supply Management White Papers / White Papers
