Browsing Posts of Author »admin2
November 23rd ,
2011 →
6:45 am
@
admin2
Learn how to apply multiple branches and multi-wire terminals with circuit breakers in industrial control panels in accordance with Underwriters Laboratories (UL) standard 508A and the National Electrical Code (NEC), National Fire Protection Association (NFPA 70-2011). Molded-case circuit breakers are used for the main overcurrent protective device (OCPD) and the main disconnecting means for an [...]
Category :
Engineering and Technical White Papers / White Papers
November 22nd ,
2011 →
9:41 am
@
admin2
I have worked with Dee Electronics for several years and consider them one of our Engineering Partners. I know I can count on them to help get the job done. Dee has been involved in a number of projects both at the component level as well as more complex assembly projects. They have always been [...]
Category :
Client Testimonials - Engineers / Testimonials
November 21st ,
2011 →
6:03 pm
@
admin2
This series consists of 3.3V, 5V, 12V, 15V, 24V, 28V, and 48VDC single output models that operate over 4:1 input voltage ranges of 9-36VDC and 18-75VDC. Size is an industry standard 2.40” × 2.28” × 0.50” half-brick package and footprint. Standard features include high efficiency up to 90%, soft start, adjustable output voltage, remote sense, [...]
Category :
Engineers Solutions Articles / Power Supplies, Batteries & Accessories / Technical Articles
November 21st ,
2011 →
6:03 pm
@
admin2
A compact design with high saturation currents for POL converters and DC/DC converters for high current power supplies. These SMD power inductors are available in five sizes (4020, 7030, 7050 1040, and 1335). They handle high transient current spikes with no acoustic noise and no leakage field. They are magnetically shielded and have a high [...]
Category :
Engineers Solutions Articles / Inductors, Transformers & Coils / Technical Articles
November 21st ,
2011 →
6:03 pm
@
admin2
The panel-mounted receptacles can be rotated during installation to allow a right-angle cordset to connect in a desired angular position. These M12 A- and B-coded connectors are commonly used for industrial networks and automation applications in harsh environments. The new receptacles are available in both male and female versions and prewired with 200mm wires. The [...]
Category :
Engineers Solutions Articles / Interconnect Products / Technical Articles
November 21st ,
2011 →
6:03 pm
@
admin2
With an integral sealing ring that ensures a superior seal every time at mounting hole location and are IP68 rated. They provide a liquid-tight seal up to 70 PSI and can be used for hydraulic and pneumatic applications. Non-corrosive/resistant against salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. They resist oil and heat up [...]
Category :
Engineers Solutions Articles / Technical Articles / Wire, Cable & Accessories
November 21st ,
2011 →
6:03 pm
@
admin2
This small footprint, right angle package is an improvement over the traditional right angle chip type SMDs through advancements in package design to deliver excellent light dispersion. The 4.0×1.4mm package size and low package profile height of 0.8mm allows this package to fit onto various designs and applications. This white LED’s lateral design is excellent [...]
Category :
Engineers Solutions Articles / Lighting Products/Opto/LEDs / Technical Articles
November 21st ,
2011 →
6:03 pm
@
admin2
This unique connector system incorporates many of the features previously found only on large power connectors. These connectors are the perfect choice when you need compact connectors that can carry up to 5.0A of current. They are available in circuit sizes 2 to 24 for wire-to-board and wire-to-wire applications offered in through-hole and SMT options. [...]
Category :
Engineers Solutions Articles / Interconnect Products / Technical Articles
November 15th ,
2011 →
2:11 pm
@
admin2
This vertically mounted float transducer series offers a reliable and economical means of tank level monitoring suitable for a wide variety of applications and liquids. Available with either brass or 316 stainless steel mounts and stainless, polypropylene or Buna-N floats, the C3957 features a 5mm resolution, while the C3946 offers a 10mm resolution. Each model has a simple [...]
Category :
Product Releases / Sensors
November 1st ,
2011 →
6:39 pm
@
admin2
Reducing the supplier base is a major initiative of all equipment manufacturers. This can be a difficult and time-consuming project. DEE offers a white paper report regarding 5 Key Factors that facilitate effective supplier reduction projects based on observations of many OEMs, where supplier reduction was achieved with simultaneous cost savings. If you would like [...]
Category :
Supply Management White Papers / White Papers
