, @ // No Comments

Bench-Top Press Terminates Large Lug Products Up to 4 AWG

TM-4000™ Universal Crimp Press

The new, industry-standard TM-4000™ Universal Crimp Press for bench-top crimping provides 3.5 tons of crimp force to terminate large lug products up to 4 AWG.  It provides an effective method of applying a wide range of side- and rear-feed terminals to heavy-gauge wires.  Designed for mid-volume, semi-automatic bench-top operations, the TM-4000 is an inexpensive, electrically controlled, direct-drive press that lowers overall applied costs and protects investment in terminal and wire products.

The TM-4000™ Universal Crimp Press is the only industry standard, bench-top press on the market that terminates large lug products up to 4 AWG, resulting in lower overall applied costs

The Molex TM-4000 Universal Crimp Press provides an effective method of applying a wide range of side- and rear-feed terminals to large lug products.  The TM-4000 press is an inexpensive, electrically controlled, direct-drive press designed for mid-volume, semi-automatic bench-top operations.

The industry standard TM-4000 Universal Crimp Press will accept the most common industry-standard applicators in the market place.  In addition, this crimp press accepts any Molex applicator, including air-feed applicators that process terminals mounted on Mylar tape.  This flexibility reduces tooling costs and provides production flexibility.

The Molex TM-4000 Universal Crimp Press can be used with the Molex Tape Crimp Module.  This will allow crimping Molex tape-mounted terminals with the use of the current ATP-201 and ATP-301 crimping die sets.  The Molex Tape Crimp Module has replaced the current Molex ATP-201 press and the Molex ATP-301 press.

Features and Benefits

  • Provides 3.5 tons (31 kN) of crimp force for tape-mounted terminals up to 4 AWG
  • Accepts Molex FineAdjust™ and Mini-Mac™ applicators with side and rear feeds; accepts most industry-standard applicators
  • Can be used with Molex Tape Module
  • Direct-drive, split-cycle press
  • Shut-height adjustment lever pre-set to industry standard 135.08mm (5.346″)
  • Meets OSHA safety and noise requirements and is CE approved
  • Two safety interlock switches are attached to the guard
  • Lowers overall applied costs
  • Reduces tooling and provides production flexibility
  • Increases quality results through the use of a consistent machine
  • Allows for use of current ATP-201 and ATP-301 die sets in an industry-standard press to minimize existing tooling investment
  • Accepts Molex air-feed applicators for tape-mounted terminals
  • Reduces noise
  • Accepts industry-standard applicators and allows for adjustment to hit the crimp-height target
  • Reduces risk of injury
  • Prevents press from cycling if guard is open during operation or hand cycling

 Applications/Markets

  • Automotive
  • Industrial
  • Commercial
  • Contract Manufacturers
  • Design / Engineering Facilities

For more information on Molex solutions, please send an email to EngHelpDesk@dee-inc.com.  DEE is a Trusted Supplier and Expert in providing Cost Savings, Fast Multiple Solution Options, Supplier Reduction, and Time Savings. We Help Manufacturers Find Solutions and Exceed Their Goals.™


Tags:

Leave a Reply