Eliminate Moisture Problems in Electrical Cabinets and Motors

December 22nd , 2010 → 7:26 am @

Eliminate Moisture Problems in Electrical Cabinets and Motors

The Only Way to Eliminate Moisture! You demand a lot from your electrical cabinets and motors.  They are subject to nightly high pressure, hot wash downs and then expected to remain dry in a refrigerated area.  Over time, most cabinets develop moisture inside which leads to premature component failures.  This interrupts production and costs you […]

Category : Parker Balston / Product Releases / Production Tools, Equipment, & Supplies

Air and Water-Tight Self-Sealing Washers

December 18th , 2010 → 4:00 pm @

Air and Water-Tight Self-Sealing Washers

Announcing Self-Sealing Washers to this Growing Family of Reusable, Self-Sealing Fastener Assembly Hardware These standard, self-sealing washers feature a silicone rubber section bonded to a specially-formed stainless-steel washer.  Pressure range exceeds 100 PSI internal/external, and is UL recognized for NEMA 4x type 6 ratings with an IP 66/68 rating.  Other sealing materials and sizes, including metric, are […]

Category : APM Hexseal / Product Releases / Production Tools, Equipment, & Supplies

Armored Pushbutton Switch Sealing Boot Useful in Prolonging Switch Life and Reliability

December 18th , 2010 → 4:00 pm @

Armored Pushbutton Switch Sealing Boot Useful in Prolonging Switch Life and Reliability

High-Pressure, High-Temperature Pushbutton Switch Sealing Boots Take Aim at High Water Pressure and Temperature Wash Downs & Rough Handling Conditions Designed to handle external pressures to 1,500 PSI (103bar), and temperatures from -80°F to +400°F (-62°C to +204°C) is only part of the story.  The external actuator mechanism is armor plated with 300 series stainless steel […]

Category : APM Hexseal / Product Releases / Production Tools, Equipment, & Supplies

The Solution for Maximum Safety and Convenient Assembly

October 9th , 2010 → 5:04 pm @

The Solution for Maximum Safety and Convenient Assembly

Introducing Push-In Wire Connectors for Both Solid and Stranded Wire Designed for wire-to-wire electrical connections, this line of push-in wire connectors is the better alternative to traditional wire connectors that involve the time-consuming twisting of wire.  And, with the introduction of the double-spring connector line to our series of push-in connectors, safety and efficiency have once again been […]

Category : HellermannTyton / Product Releases / Production Tools, Equipment, & Supplies

Hygenic Design Enclosures When Cleanliness Is Critical

September 12th , 2010 → 2:57 pm @

Hygenic Design Enclosures When Cleanliness Is Critical

For some industries there can be no compromises—we all expect banks to safeguard our money, cell phone companies to complete our calls without dropping them, and hospitals to provide life saving care, every time we count on them.  Similarly, when these high standards are applied to the food packaging, pharmaceutical, bio-technical and chemical industries, every […]

Category : Product Releases / Production Tools, Equipment, & Supplies / Rittal

Introducing Support Arm System Ideal for Intermediate Loads

September 12th , 2010 → 2:57 pm @

Introducing Support Arm System Ideal for Intermediate Loads

Machine controls often need to be easily moved into a position for use, adjusted to the user’s height, then pushed out of the way when the operation is complete.  That’s when a support arm system is ideal — get the needed changes made, then get the enclosure off to the side. Need a flexible pendant […]

Category : Product Releases / Production Tools, Equipment, & Supplies / Rittal

A Revolutionary Breakthrough In Spring Technology!

August 22nd , 2010 → 9:29 am @

A Revolutionary Breakthrough In Spring Technology!

Now Even STRONGER Spring Rates Plastic Composite Springs are a response to increased requests for springs that combine the strength of metal with the special attributes of high performing engineered thermoplastics.  After years of extensive engineering design and materials research, this unique compression spring has been developed. Plastic Composite Springs are a new and unique spring […]

Category : Lee Spring / Product Releases / Production Tools, Equipment, & Supplies

New – PR Plus Printer Series Printing 6″ Wide Labels

May 28th , 2010 → 3:04 pm @

New – PR Plus Printer Series Printing 6″ Wide Labels

In addition to the PR Plus printer series, Brady is pleased to announce a 300dpi 6” wide printer. Available in both standard and peel & present versions.  Peel & present model includes a take-up spindle and internal rewinder. Features & Benefits: Prints up to 6″ wide labels High volume/High speed printing Small 2D barcode capabilities […]

Category : Brady / Product Releases / Production Tools, Equipment, & Supplies

New Product Launch: TT330SM Thermal Transfer Printer

September 16th , 2009 → 4:58 pm @

New Product Launch: TT330SM Thermal Transfer Printer

HellermannTyton’s TT330SM thermal transfer printer is designed for low to medium volume printing of thermal transfer labels and ShrinkTrak. The TT330SM delivers optimal performance not found in other small desktop printers. This lightweight printer offers high speed, precision, and flexible printing with the ability to print on most HellermannTyton labels and ShrinkTrak. Used in conjunction with TagPrint™ Pro, the TT330SM will offer error free printing and seamless operation.

Category : HellermannTyton / Product Releases / Production Tools, Equipment, & Supplies