Browsing Category »Sensors
February 18th ,
2010 →
11:21 am
@
admin2
-20°F to 150°F, Manual Reset HVAC Pressure Switch
Features and Overview
Trip-free manual reset
Maintenance-free design
Single-pole, single-throw, normally closed contacts
Factory calibrated pressure set points
Hermetically sealed sensor
The 29PS HVAC pressure switch utilizes a snap-acting stainless steel Klixon disc that reverses its curvature when pressurized above a customer specified actuation pressure. When the disc snaps it opens a set of [...]
Category :
Product Releases / Sensata / Sensors
February 18th ,
2010 →
9:32 am
@
admin2
-10°C to 85°C, Automatic Reset HVAC Pressure Switch
Features and Overview
Electrically rated up to 480 Vac
High current capability
Capable of 2.5 million cycles (requires Sensata/customer specification closure and validation testing before application approval)
A breakthrough in Sensata Technologies’ pressure switch technology enables direct line break capability in applications that have been traditionally controlled in pilot duty circuits by [...]
Category :
Product Releases / Sensata / Sensors
February 15th ,
2010 →
3:24 pm
@
admin2
-20°F to 275°F, Automatic Reset HVAC Pressure Switch
Features and Overview
Single pole, single throw normally open or closed contacts
Factory calibrated pressure setpoints
Hermetically sealed sensor
Enviornmentally sealed or vented switch
Electrically rated to 600Vac (45PS)
High current switch (up to 13FLA) for direct motor control
Product Uses
Appropriate for a Wide Range of HVAC/R and Industrial Applications Including:
Direct control of motors and [...]
Category :
Product Releases / Sensata / Sensors
January 22nd ,
2010 →
9:02 am
@
admin2
-20°F to 150°F, Automatic Reset Pressure Switch
Features and Overview
Epoxy-less seal
Flexible range of set-points and tolerances
Factory calibrated fixed set-points
Single-pole, single-throw switch; normally open or closed contacts
Hermetically sealed sensor
The PS80 is an automatic reset HVAC pressure switch designed to meet a broad variety of application requirements by offering a wide range of pressure settings, port fittings, and [...]
Category :
Product Releases / Sensata / Sensors
January 19th ,
2010 →
11:14 am
@
admin2
-40°F to 275°F, Automatic Reset Pressure Switch
Features and Overview
Single-pole, single-throw switch normally open or closed contacts
Factory calibrated pressure setpoints
Hermetically sealed sensor
Enviornmentally sealed switch or vented switch
Product Uses
Appropriate for a Wide Variety of Commercial and Industrial Applications, Including:
High and low limit safety controls on unitary and central air conditioning systems
Clutch disconnect and fan cycling switches for [...]
Category :
Product Releases / Sensata / Sensors
January 18th ,
2010 →
4:31 pm
@
admin2
-20°F to 150°F, Automatic Reset Pressure Switch
Features and Overview
Single pole, single throw switch normally open or closed contacts
Factory calibrated pressure setpoints from vacuum to 750 psig (52 Bar)
Snap-acting, stainless steel
Hermetically sealed sensor
Enviornmentally sealed or vented switch
This compact, rugged switch utilizes a snap-acting stainless steel diaphragm that reverses its curvature when pressurized to a customer-specified actuation [...]
Category :
Product Releases / Sensata / Sensors