Browsing Category »Sensata
February 18th ,
2010 →
11:21 am
@
admin2
-20°F to 150°F, Manual Reset HVAC Pressure Switch Features and Overview Trip-free manual reset Maintenance-free design Single-pole, single-throw, normally closed contacts Factory calibrated pressure set points Hermetically sealed sensor The 29PS HVAC pressure switch utilizes a snap-acting stainless steel Klixon disc that reverses its curvature when pressurized above a customer specified actuation pressure. When the [...]
Category :
Product Releases / Sensata / Sensors
February 18th ,
2010 →
9:32 am
@
admin2
-10°C to 85°C, Automatic Reset HVAC Pressure Switch Features and Overview Electrically rated up to 480 Vac High current capability Capable of 2.5 million cycles (requires Sensata/customer specification closure and validation testing before application approval) A breakthrough in Sensata Technologies’ pressure switch technology enables direct line break capability in applications that have been traditionally controlled [...]
Category :
Product Releases / Sensata / Sensors
February 15th ,
2010 →
3:24 pm
@
admin2
-20°F to 275°F, Automatic Reset HVAC Pressure Switch Features and Overview Single pole, single throw normally open or closed contacts Factory calibrated pressure setpoints Hermetically sealed sensor Enviornmentally sealed or vented switch Electrically rated to 600Vac (45PS) High current switch (up to 13FLA) for direct motor control Product Uses Appropriate for a Wide Range of [...]
Category :
Product Releases / Sensata / Sensors
January 22nd ,
2010 →
9:02 am
@
admin2
-20°F to 150°F, Automatic Reset Pressure Switch Features and Overview Epoxy-less seal Flexible range of set-points and tolerances Factory calibrated fixed set-points Single-pole, single-throw switch; normally open or closed contacts Hermetically sealed sensor The PS80 is an automatic reset HVAC pressure switch designed to meet a broad variety of application requirements by offering a wide [...]
Category :
Product Releases / Sensata / Sensors
January 19th ,
2010 →
11:14 am
@
admin2
-40°F to 275°F, Automatic Reset Pressure Switch Features and Overview Single-pole, single-throw switch normally open or closed contacts Factory calibrated pressure setpoints Hermetically sealed sensor Enviornmentally sealed switch or vented switch Product Uses Appropriate for a Wide Variety of Commercial and Industrial Applications, Including: High and low limit safety controls on unitary and central air [...]
Category :
Product Releases / Sensata / Sensors
January 18th ,
2010 →
4:31 pm
@
admin2
-20°F to 150°F, Automatic Reset Pressure Switch Features and Overview Single pole, single throw switch normally open or closed contacts Factory calibrated pressure setpoints from vacuum to 750 psig (52 Bar) Snap-acting, stainless steel Hermetically sealed sensor Enviornmentally sealed or vented switch This compact, rugged switch utilizes a snap-acting stainless steel diaphragm that reverses its [...]
Category :
Product Releases / Sensata / Sensors
