The series is ideal for integration into photovoltaic renewable energy systems, which can be designed into the system’s combiner box or main disconnect. 

For more information on Carling Technologies solutions, please send an email to MyFeedback@dee-inc.com.  DEE is a Trusted Supplier and Expert in providing Cost Savings, Fast Multiple Solution Options, Supplier Reduction, and Time Savings.  We Help Manufacturers Find Solutions and Exceed Their Goals.™

Since EtherNet/IP is the most popular industrial network protocol across the Americas, this communication unit removes a major obstacle for OEM machine builders to use 3G3MX2 AC drives in their projects.

The powerful 3G3MX2 AC Drive was designed with OEM’s in mind.  It features standard built-in logic programmability and CAT3 Safety Torque Off, which enables OEMs to save time and money.  The MX2 is a versatile high performance AC Drive that is available in several input voltages and power ratings.  Its breadth of modes and adjustable parameters make it practical for an OEM to standardize to one drive to address the needs of their entire machine.

For more information on Omron solutions, please send an email to MyFeedback@dee-inc.com.  DEE is a Trusted Supplier and Expert in Providing Cost Savings, Fast Multiple Solution Options, Supplier Reduction, and Time Savings.  We Help Manufacturers Find Solutions and Exceed Their Goals.™

Introducing a unique ultra-miniature tact switch that mounts on the side of the PC board.  This series of tact switch offers a 200,000 cycle life expectancy in an ultra-compact size.

The markets for the new edge-mounted tact switches include audio/visual, consumer electronics, computer peripherals, instrumentation, medical equipment and telecommunication.

Features

• Electrical Ratings: 50mA, 12VDC
• Life Expectancy: 200,000 cycles
• Contact Resistance: <1Ω maximum
• Insulation Resistance: 100MΩ minimum at 500VDC
• Dielectric Strength: 250VAC for 1 minute
• Operating Temperature: -40°C to +85°C minimum
• Operating Force: 160gf ± 50gf
• Travel: 0.15 mm ± 0.10 mm
• Function: SPST, Off-(On), momentary

For more information on E-Switch solutions, please send an email to MyFeedback@dee-inc.com.  DEE is a Trusted Supplier and Expert in providing Cost Savings, Fast Multiple Solution Options, Supplier Reduction, and Time Savings.  We Help Manufacturers Find Solutions and Exceed Their Goals™.

Finally a fully illuminated power-rated rocker switch that is sealed to IP66 ratings, WITHOUT THE BOOT!  No rubber boot/PVC cap is needed for our brand new series rocker switch.  It uses a patented sealing technology to provide protection from dust and moisture all while offering full illumination in a 22 mm × 30 mm panel cutout!

We are very excited to introduce the new series rocker switch, a fully illuminated, internally sealed, panel mount rocker switch that doesn’t require a PVC boot.  We feel the unique benefit will impact many different categories where design and visual appearance matters to the end user.”

The sealed and illuminated rocker switch is approved under new UL 61058-1 rating, and UL approved up to 1/3 HP.

The markets for the new fully illuminated series sealed rocker switch include commercial appliances, electrical housewares, floor care appliances, industrial controls, medical equipment, white goods and more.

For more information on E-Switch solutions, please send an email to MyFeedback@dee-inc.com.  DEE is a Trusted Supplier and Expert in providing Cost Savings, Fast Multiple Solution Options, Supplier Reduction, and Time Savings.  We Help Manufacturers Find Solutions and Exceed Their Goals™.

The illuminated pushbutton switch series features a threaded panel mount, and is sealed to IP65 standards.  It also has a long life expectancy with 500,000 operating life cycles.

Specifications Include:

• Life Expectancy: 500,000 cycles full load
• Contact Rating: 100mA, 50VDC; 125mA, 125VAC
• Contact Resistance: (Initial Max): 50 milliohms
• Contact Bounce: 10ms Max.
• Insulation Resistance: 1,000 Megaohms min at 500VDC
• Dielectric Strength: (1 min): 1,000 VAC
• Operating Force: 350gf ± 150gf
• Total Travel: 1.5mm ± 0.25mm
• Operating Temperature: -30°C to +85°C
• Panel Cutout: 13.66 diameter
• Function: SPST, OFF-(On) Momentary

This series illuminated switch is a great product for the audio/visual, electrical housewares, floor care appliances, medical devices and white goods markets.

For more information on E-Switch solutions, please send an email to MyFeedback@dee-inc.com.  DEE is a Trusted Supplier and Expert in providing Cost Savings, Fast Multiple Solution Options, Supplier Reduction, and Time Savings.  We Help Manufacturers Find Solutions and Exceed Their Goals™.

Your Choice for Push-Pull Switches

The PP1 series pushbutton switch features a push pull function and various terminal options.  This switch has high ratings with UL approvals.

Features

Electrical Rating:

• 16A 125VAC [cULus]
• 12A 250VAC [cULus]
• 1HP 125/250VAC [cULus]
• Temperature: 0°C to 85°C
• Electrical Life: 6,000 Cycles [cULus]
• Contact Resistance: 50mΩ Max.

Materials

• Body: Polyamide 6/6
• Actuator: Polyamide 6/6
• Contacts: Silver Alloy
• Terminals: Silver Plated Brass

For more information on E-Switch solutions, please send an email to MyFeedback@dee-inc.com.  DEE is a Trusted Supplier and Expert in providing Cost Savings, Fast Multiple Solution Options, Supplier Reduction, and Time Savings.  We Help Manufacturers Find Solutions and Exceed Their Goals™.

Ground Fault Circuit Protection

Dee Electronics announced the .01-30 Amp, PB-series to the marketplace in March of 2008, and now is releasing  a new addition to the ground fault circuit breaker product portfolio – The 1-50 Amp, PC-series. 

Like the PB-series, the new PC-series is available with a rocker or toggle style actuation, and utilizes the hydraulic/magnetic principle which provides precise circuit protection operation and performance, even when exposed to extremely hot and/or cold application environments.  Both the PB-series and PC-series AC Residual Current Circuit Breaker with Overcurrent Protection (RCBO), are compact and fully integrated devices, combining the ground fault protection of a GFCI with the familiar overcurrent tripping characteristics of a normal circuit breaker.  The PC-series comes with LED indicators that illuminate to distinguish if the breaker is closed with line voltage present, or has opened due to a leakage current, or has opened due to over current, or is closed with no line voltage present.  In addition, there is an optional feature that detects L/N reversal.

The PC-Series Is Suitable For:

• AC branch ground fault protection – a single circuit solution
• AC main ground fault protection for a boat’s entire AC electrical system
• Portable generator ground fault protection

 Key Benefits of the PC-Series

• Increases safety around boats and marinas
• Protects against electrical shock hazards in areas near water
• Protects against defects in the wires & conductors
• Reduces fire and shock hazards form defects in permanently installed appliances such as water heaters, battery chargers, lighting fixtures, etc.
• Detects low level ground faults, which do not trip ordinary circuit breakers, that can lead to fires and shock hazards for boating occupants

Innovative Features

These precision mechanisms are temperature stable and are not adversely affected by temperature changes in their operating enviornment.  As such, derating considerations due to temperature variations are not normally required, and heat-induced nuisance tripping is avoided.

• Overload, short circuit and ground fault protection in a single package
• Handle style actuators and rocker style “acuguard”
• Wiping Contacts – Mechanical linkage with two-step actuation – cleans contacts, provides high, positive contact pressure, and longer contact life
• A trip-free mechanism, a safety feature, makes it impossible to manually hold the contacts closed during overload or fault conditions
• A common trip linkage between all poles, another safety feature, ensures that an overload in one pole will trip all adjacent poles
• Front panel mounting
• Integral push-to-test button
• Two integrated LED indicators distinguish if a breaker is closed with Line Voltage present, or has opened due to leakage current, or has opened due to overcurrent, or is closed with no Line Voltage present
• Optional Hot/Neutral reversal detection and protection

For more information on Carling Technologies solutions, please send an email to EngHelpDesk@dee-inc.com.  DEE is a Trusted Supplier and Expert in providing Cost Savings, Fast Multiple Solution Options, Supplier Reduction, and Time Savings.  We Help Manufacturers Find Solutions and Exceed Their Goals.™

PCB Relay

Product Features

• RoHS compliant
• Low profile 15.7mm in height
• Creepage and clearance distance between coil and contacts 8mm/8mm
• Single pole 16A power relay
• AC coil type and High Inrush types available
• Low Noise version available:
  • 25% (15dB) less sound pressure than standard relays
• Conforms to UL, CSA, and VDE

 Contact Form

• SPST-NO, SPDT

Resistive Load

• 16 A at 250VAC, 24VDC (NO), 5A at 250VAC, 24VDC (NC)

For more information on Omron solutions, please send an email to EngHelpDesk@dee-inc.com.  DEE is a Trusted Supplier and Expert in Providing Cost Savings, Fast Multiple Solution Options, Supplier Reduction, and Time Savings.  We Help Manufacturers Find Solutions and Exceed Their Goals.™

E-Switch introduces the new LP15 series illuminated pushbutton switch, featuring multiple LED colors, custom marking options for the caps, and several cap sizes.  The LED colors available are red, blue, green, yellow, and white.  You can choose from four different button colors, as well: black, red, white and transparent.  You can choose a common graphic or customize your own graphic for the button cap.  Specifications include:

• Contact Rating: 1mA @ 20VDC
• Electrical Life: 300,000 cycles
• Contact Resistance: 200 ohms max @ 5VDC, 1.5mA
• Dielectric Strength: 250 VAC for 1 min.
• Force: 125 gf ± 35 grams
• Travel: 1.3mm ± 0.3mm
• Operating Temperature: -20°^C to +70°^C

Applications and markets for the LP15 series illuminated pushbutton switch include audio/visual, consumer electronics, telecommunications, medical, testing/instrumentation, computer servers, and more.

Please contact us to request a full-line catalog!  You can also request a sample of this or any E-Switch product!

E-Switch announces the new LP2 series illuminated pushbutton switch, featuring multiple LED colors, custom marking options on the caps, and different cap sizes.  The LED colors feature red, blue, green, yellow, white, or none.  You can choose from six different button colors as well: black, red, white, gray, transparent red, and transparent blue.  You also can choose a stock graphic or a custom graphic for the button.  Specifications include:

• Operating Life: 300,000 cycles
• Contact Rating: 20VDC @ 1mA; 5VDC @ 5mA
• Contact Resistance (Initial Max): 200milliohms max @ 5VDC, 1mA
• Contact Arrangement: SPST, normally open
• Insulation Resistance: 100Megaohms max @ 100VDC
• Dielectric Strength (1 min): 250 VAC
• Force: 125 ± 35 grams
• Travel: 1.3mm ± 0.3mm
• Operating/Storage Temperature: -20C to +70C

Markets and applications for the LP2 series illuminated pushbutton switch include audio/visual, consumer electronics, telecommunications, medical, testing/instrumentation, computer/servers, and more.

For more information on E-Switch solutions, please send an email to EngHelpDesk@dee-inc.com.  We Help Manufacturers Find Solutions and Exceed Their Goals.  DEE is a Trusted Supplier and Expert in providing Cost Savings, Fast Multiple Solution Options, Supplier Reduction, and Time Savings.