DEE Electronics » Solution Kits

Free Strain Relief Solution Resource Kit

admin2 — Thu, 22 Dec 2011 00:03:04 +0000

Dee created a limited number of nice Application Strain Relief (has been known to fix headaches) Resource Kits that will allow you to quickly find a strain relief solution for your design. If you would like a Free Strain Relief Solution Resource Kit, please send an email to MyFeedback@dee-inc.com with “Strain Relief Solution Kit” in the subject line, and provide all of your contact information. Follow this link to browse other Solution Kits that Dee has created.

Free Din Rail Terminal Block Kit

admin2 — Tue, 20 Dec 2011 14:05:13 +0000

This kit is a sample rail of some different types of terminal blocks that may be used in Din rail applications. These rails range from small to large blocks, and have many solution-type blocks that you may have never seen before. To order yours, please send an email to MyFeedback@Dee-inc.com?Subject=FREE Din Rail Terminal Block Kit with “FREE Din Rail Terminal Block Kit” in the subject line, and be sure to provide your contact information.

Free Handles Kit

admin2 — Mon, 28 Nov 2011 14:24:56 +0000

Eleven attractive and functional handles lines available in an extensive selection of sizes, materials, and finishes provide the right handle for applications ranging from rack-mounted equipment to stylish carrying cases. In addition, a choice of handle ferrules is offered to reinforce and complete the installation. To order yours, please send an email to MyFeedback@Dee-inc.comwith “FREE Handle Kit” in the subject line, and be sure to include your contact information.

Free Cable Tie Kit

admin2 — Sun, 25 Sep 2011 19:52:25 +0000

Multi-color cable ties with a selection of indoor and outdoor versions. This kit has the most common versions and makes a great addition to any Engineering room. Stop looking around for something that will work, and reach for your Dee Electronics Cable Tie Kit. To order yours, please send an email to MyFeedback@Dee-inc.com with “FREE Cable Tie Kit” in the subject line, and be sure to provide your contact information.

Free RF PC Edge Mount Connector Kit

admin2 — Sun, 28 Aug 2011 12:58:40 +0000

PC Edge Mount RF connector with all the advantages a designer could want. It edge-mounts to the board, which offers the lowest profile and utilizes very little PCB real estate. It lends itself to surface-mount and through-hole soldering techniques. There are versions for IR and convection reflow soldering. Because the connector locks into place both above and below the PCB, it disperses rotational torque relief to the board and not the solder points. This design offers the lowest VSWR ratings due to the straight through-put contact design. No right angles for reflection. Available in 50 and 75 ohm, threaded and non-threaded versions along with “F”, BNC Twin, TNC and N sections. To order yours, please send an email to MyFeedback@Dee-inc.com with “FREE PC Edge Mount Connector Kit” in the subject line, and be sure to provide your contact information.

Free Insulated and Non-Insulated Wire Joint Kit

admin2 — Thu, 25 Aug 2011 14:42:54 +0000

This kit has 4 Different Insulated sizes from Min (2) 24AWG – (4) 12AWG and everything in between. They are RoHS compliant and UL, CSA rated up to 600V per UL 486C. They have a temp. rating of 105^c or 221^F. The noninsulated versions have 3 sizes and range from (2) #14AWG – (4) #10 AWG, and have the same UL approvals as the insulated version. The temp. range is higher at 150^C and 302^F. To order yours, please send an email to MyFeedback@Dee-inc.com with “FREE Wire Joint Kit” in the subject line, and be sure to provide your contact information.

Free Corrugated Tubing Holding with Push Mount Solution Kit

admin2 — Tue, 26 Jul 2011 19:34:35 +0000

These push-mount holders are used to secure and route all standard sizes of solid wall or split corrugated loom tubing. The ribs prevent lateral movement of corrugated loom tubing along the mount. The rugged clip prevents accidental disassembly of tubing due to shock or vibration. This kit contains units to handle a maximum panel thickness of 0.125 inches or 3.2 mm, and diameters from 0.19 to 0.87 inches or 5 to 22 mm. They have a panel hole diameter of 0.386″ or 9.8 mm. To order yours, please send an email to MyFeedback@Dee-inc.com with “FREE Corrugated Tubing Holders with Push Mounts” in the subject line, and be sure to include your contact information.

Free Push-In Terminal Block Sample Kit

admin2 — Tue, 24 May 2011 12:54:38 +0000

Reduce fatigue, save time, and simplify wiring with push-in terminal blocks. These toolless terminal blocks use a direct push-in connection and require 50 percent lower insertion force when connecting solid conductors or conductors with ferrules. As part of the complete system, push-in terminal blocks are compatible with standard system accessories including bridging, checking, and marking. They deliver maximum flexibility in a variety of options including feed-through, multi-conductor, component, and pluggable terminal blocks, and can be combined with screw, spring-cage, and fast connection terminal blocks. To order yours today, you can send an email to MyFeedback@Dee-inc.com with “Free PIT Terminal Block Kit” in the subject line, and be sure to include your contact information.

Free 40/30 Amp Automotive Plug-In Power Relays Kit

admin2 — Wed, 18 May 2011 17:11:16 +0000

This kit contains a representation of all your design needs. These relays come in a wide variety form factors 1A, 1AA; 1C. Mounting options include plain case, plastic and metal bracket; weather-proof shrouded case. Coil voltages are 12 and 24VDC. Also included are sealed and unsealed versions and some with resistors. These relays have a switching capacity of up to 120 amps with 40 amps continuous carry capacity. All are RoHS compliant. To order yours, please send an email to MyFeedback@Dee-inc.com with “FREE 40/30 Amp Plug-In Automotive Relays” in the subject line, and be sure to include your contact information.

Free Snap Action/Micro Switch Solution Kit

admin2 — Sat, 26 Mar 2011 14:49:09 +0000

This kit contains the most popular switches for all your design needs. These switches come in a wide variety of actuators, operating force, and termination options, including an SMT version designed for higher reliability applications. The SMT version has a cycle life of 3,000,000. The switches in this kit range from 100 mA – 15 Amps. This kit contains full size and sub-miniature sizes. To order yours, please send an email to MyFeedback@Dee-inc.com with “Free Snap Action Kit” in the subject line, and be sure to include your contact information.