Notice: Undefined index: a777d in D:\Dee-inc\index.php on line 3 Heat & Circuit Protection | DEE Manufacturing & Distribution - Part 2

AEC-Q200 Qualified Surface Mount Polyswitch Devices

January 23rd , 2011 → 3:56 am @

AEC-Q200 Qualified Surface Mount Polyswitch Devices

These devices will help vehicle manufacturers meet industry safety and reliability standards, reduce system cost, and improve the efficiency and reliability of electronics designs.  The automotive-grade PolySwitch devices have been tested to follow the guidelines of the automotive industry’s AEC-Q200 standard for electronic components.  Available in footprints as small as 1206, the devices provide current […]

Category : Engineers Solutions Articles / Heat & Circuit Protection / Technical Articles

New High Current Semi-Conductor Fuse Holders

December 21st , 2010 → 10:21 am @

New High Current Semi-Conductor Fuse Holders

Semi-conductor fuse holders accommodate semi-conductor and high-speed specialty fuses.  The new design incorporates a high-strength engineering thermoplastic insulator base which makes these fuse holders ideal for applications exposed to extreme conditions such as shock and vibration.  The high electrical ratings make them ideal for applications such as lithium-ion battery packs, inverters, industrial panels, and other […]

Category : Engineers Solutions Articles / Heat & Circuit Protection / Technical Articles

A Thermal Circuit Breaker with Rotary Knob Actuator

November 28th , 2010 → 12:16 pm @

A Thermal Circuit Breaker with Rotary Knob Actuator

This rotary switch offers IP 40 protection.  The switch and thermal overload protection with positively trip-free release includes current ratings ranging from 0.05 A to 20 A for 1- and 2- pole types, and 0.05 A to 12 A for the 3-pole version.  Admissible ambient temperature range is from -30°C to + 60°C.  Ideally suited […]

Category : Engineers Solutions Articles / Heat & Circuit Protection / Technical Articles

15×15×16 Millimeter DC Fan

November 28th , 2010 → 12:16 pm @

15×15×16 Millimeter DC Fan

NEW trend of light, slim, and smaller fan now has a DC fan 15×15×6 mm, which is the SMALLEST (15mm), the THINNEST (6mm), and the LOWEST power consumption.  Specifications: rated voltage: 5V, operating voltage: 4~6 V, rated current: 0.04~0.06 A, speed: 8,000~13,000 RPM, air flow: 0.23~0.43 CFM, static pressure: 0.61~1.60 mmH2O, noise: 18.63~19.63 dBA, bearing: […]

Category : Engineers Solutions Articles / Heat & Circuit Protection / Technical Articles

New Gas-Discharge-Tube Lightning Arrestor

October 23rd , 2010 → 10:00 am @

New Gas-Discharge-Tube Lightning Arrestor

This gas-discharge-tube lightning protector covers DC to 12.5 GHz, is available with reverse polarity, provides 10× multi-strike protection of 5 kA, and handles 100 W.  Letthrough is 475 A peak (300 uJ), and the unit meets military standards for salt fog, immersion, moisture resistance, temperature shock, dust and waterproofing, humidity, and vibration.  It measures 1.43 […]

Category : Engineers Solutions Articles / Heat & Circuit Protection / Technical Articles

New Industries Fastest Arc Flash Protection

October 23rd , 2010 → 10:00 am @

New Industries Fastest Arc Flash Protection

This unit can contain an arc flash within 8ms – even with the compartment doors open.  Expected to be the fastest arcing fault containment technology in the industry, it can help reduce the occurrence and severity of workrelated injuries and lost productivity.  Thanks to its innovative design, it provides better equipment protection, and more productivity […]

Category : Engineers Solutions Articles / Heat & Circuit Protection / Technical Articles

Improve Down Time with Resettable Thermal-Magnetic Circuit Breakers

September 25th , 2010 → 3:20 pm @

Improve Down Time with Resettable Thermal-Magnetic Circuit Breakers

Save time and protect devices by replacing fuses with resettable thermal-magnetic circuit breakers.  Thermal-magnetic circuit breakers not only protect electrical circuits from overload or short circuit damage, but also make it simple to get your system up and running again in the event of a fault condition.  You’ll eliminate time-consuming troubleshooting with the push of […]

Category : Engineers Solutions Articles / Heat & Circuit Protection / Technical Articles

Super Quick-acting Fuse Offers Low Current Ratings in Compact 1206 Footprint

July 24th , 2010 → 10:35 am @

Super Quick-acting Fuse Offers Low Current Ratings in Compact 1206 Footprint

The super-quick acting characteristic provides a reliable and stable opening time, required for extremely sensitive electronic circuits.  The wire-bond technology allows for increased protection of DC overcurrent conditions in dense circuits, where heat dissipation is critical.  For example, the low voltage drop value for the 200 mA version is 87 mV, which is about three […]

Category : Engineers Solutions Articles / Heat & Circuit Protection / Technical Articles

Surface Mount Fuse In A 1210 (3.2 × 2.6 mm) Footprint

May 20th , 2010 → 8:24 am @

Surface Mount Fuse In A 1210 (3.2 × 2.6 mm) Footprint

These RESETTABLE surface mount fuses are ideal for game console port protection, PC motherboards, cell phones, and many more applications.  Fuses are packaged on 3,000 piece 180 mm reels for high volume production.  V max=6.0 – 30.0 VDC.  I max =10 – 40 A.  I hold = 0.05 – 1.5 A.  Standards: UL 1434 and […]

Category : Engineers Solutions Articles / Heat & Circuit Protection / Technical Articles

New Subminiature, 3.6 × 10 mm Time Lag Fuse, Uses Less Board Space

March 19th , 2010 → 4:10 pm @

New Subminiature, 3.6 × 10 mm Time Lag Fuse, Uses Less Board Space

This smaller, 3.6 × 10 mm fuse was designed to use less board space than the standard 5 x 20 mm fuse, yet provide similar performance with a lower breaking capacity.  The product was designed for volume business in digital consumer electronics or power supplies.  This is a Ceramic Tube IEC Standard Miniature Fuse.  Standards […]

Category : Engineers Solutions Articles / Heat & Circuit Protection / Technical Articles

Parse error: parse error in D:\Dee-inc\wp-content\themes\Destination\footer.php on line 20