May 21st ,
2009 →
12:07 pm
@
admin2
New, radial leaded varistors, also referred to as MOV (Metal Oxide Varistors), are the latest addition in the circuit protection products now available. The new range of varistors includes three types: the AVTP for primary protection; rated voltage at 120 – 360 VAC, AVTS for secondary protection; rated voltage 11 – 95 VAC, and the [...]
Category :
Engineers Solutions Articles / Heat & Circuit Protection / Technical Articles
February 17th ,
2009 →
11:25 am
@
admin2
This single pole, thermal-magnetic breaker is only 12.5 mm wide, and is available in current ratings from 0.1 A - 32 A. These are available with four available trip characteristics. The range of versions allows exact specification of continuous loads and inrush currents, load circuits, and cable cross sections specific to individual user requirements. UL 489 and [...]
Category :
Engineers Solutions Articles / Heat & Circuit Protection / Technical Articles
January 13th ,
2009 →
1:51 pm
@
admin2
This remarkably compact Electronic Circuit Protector is just 2.76” H by 0.5“ W, and allows direct mounting on a 35 mm din rail. It combines electronic trip characteristics and active current limitation to allow selective disconnection of loads connected to 24VDC power supplies. Selective load protection prevents complete shutdown of the system by quickly disconnecting [...]
Category :
Engineers Solutions Articles / Heat & Circuit Protection / Technical Articles
December 9th ,
2008 →
9:08 am
@
admin2
These new trendy circuit breakers are available in 1-, 2-, or 3-pole arrangements. Their compact form and attractive design really make them stand out. The rocker-actuating switch can be supplied either with or without illumination, in your choice of 5 bright colors, and with various legends or customer-specific symbols. The breakers have been designed for [...]
Category :
Engineers Solutions Articles / Heat & Circuit Protection / Technical Articles
December 9th ,
2008 →
9:08 am
@
admin2
Dee Electronics is pleased to introduce the latest addition to our Thermal Circuit Protector line. Designed for industry standard 0.550 × 1.125 mounting hole, this series is a switch and circuit protector in one small, compact package. This combo-device eliminates the need for both a switch and thermal circuit protector on customer panels. By using [...]
Category :
Engineers Solutions Articles / Heat & Circuit Protection / Switches & Relays / Technical Articles
