Browsing Category »Power Supplies, Batteries & Accessories
December 19th ,
2011 →
4:02 pm
@
admin2
This series consists of constant voltage DC/DC converters with non-regulated single outputs. This series can deliver up to 3A of output current in a small, open-frame SIP package. These converters have output power ranging from 1.8 to 45 Watts, and operate over input voltage ranges of 2.5-5.5, 4.5-14, and 10-30VDC. They are ideal for a [...]
Category :
Engineers Solutions Articles / Power Supplies, Batteries & Accessories / Technical Articles
November 21st ,
2011 →
6:03 pm
@
admin2
This series consists of 3.3V, 5V, 12V, 15V, 24V, 28V, and 48VDC single output models that operate over 4:1 input voltage ranges of 9-36VDC and 18-75VDC. Size is an industry standard 2.40” × 2.28” × 0.50” half-brick package and footprint. Standard features include high efficiency up to 90%, soft start, adjustable output voltage, remote sense, [...]
Category :
Engineers Solutions Articles / Power Supplies, Batteries & Accessories / Technical Articles
September 25th ,
2011 →
2:33 pm
@
admin2
These converters are available in both 0.74 × 0.50 × 0.33 inch DIP and SMT packages and have a weight of only 0.16oz. Available in 2:1 input voltage ranges of 4.5-9, 9-18, 18-36, or 36-75VDC and 4:1 input voltage ranges of 4.5-18, 9-36, or 18-75VDC. They have 3.3, 5, 9, 12, and 15VDC single output [...]
Category :
Engineers Solutions Articles / Power Supplies, Batteries & Accessories / Technical Articles
September 25th ,
2011 →
2:33 pm
@
admin2
Built-in active PFC function, these high efficiency power units meet the harmonic current limitation per EN61000-3-2. Equipped with 180 to 550VAC single phase wide input range, they can be used in general power system applications with single phase 230VAC input or can capture two phases from the 220~550VAC threephase power system, which can greatly increase [...]
Category :
Engineers Solutions Articles / Power Supplies, Batteries & Accessories / Technical Articles
August 26th ,
2011 →
3:58 pm
@
admin2
These converters provide 15 watts of output power in a standard 24-pin 1.25” × 0.80” × 0.40” DIP package. Choice of 2 models: one operates over 2:1 input voltage ranges of 9-18, 18-36, and 36-75VDC, and the other operates over 4:1 input voltage ranges of 9-36 and 18-75VDC. These two series have 3.3, 5.1, 12, [...]
Category :
Engineers Solutions Articles / Power Supplies, Batteries & Accessories / Technical Articles
July 25th ,
2011 →
9:43 am
@
admin2
Features include: universal input 100 – 240 VAC, 12 VDC to 48 VDC, over-current protection, over-voltage protection, short circuit protection, 100% burn-in, RoHS compliant, CEC efficiency level: V, and has an optional on/off switch. Meets or exceeds the following safety standards: UL/ C-UL, FCC, CB, CE, GS, PSE, and BSMI. Meets conduction limits of FCC [...]
Category :
Engineers Solutions Articles / Power Supplies, Batteries & Accessories / Technical Articles
July 25th ,
2011 →
9:43 am
@
admin2
These power conditioners are small footprint, active DC power conditioning modules. They are designed to be installed at the terminus of DC linear & switching power supplies. With their low noise and low impedance, they produce a highly purified source of DC power for any load within their ratings. Signal-on-rail is reduced along with power [...]
Category :
Engineers Solutions Articles / Power Supplies, Batteries & Accessories / Technical Articles
June 26th ,
2011 →
2:34 pm
@
admin2
Designed to answer the needs of higher power systems requiring low input voltages (10 VDC to 36 VDC) at higher power levels up to 600 watts. Some features include efficiency up to 92%, active high or active low remote on/off, active current sharing option, and ±10% output trim. Applications include: telecommunications, industrial, network, and test [...]
Category :
Engineers Solutions Articles / Power Supplies, Batteries & Accessories / Technical Articles
March 25th ,
2011 →
7:59 am
@
admin2
These converters are available in both 0.74 × 0.50 × 0.33 inch DIP and SMT packages and have a weight of only 0.16 oz. Available in two input options: 2:1 input voltage ranges of 4.5-9, 9-18, 18-36, or 36-75VDC, and 4:1 input voltage ranges of 4.5-18, 9-36, or 18-75 VDC. These two series have 3.3, [...]
Category :
Engineers Solutions Articles / Power Supplies, Batteries & Accessories / Technical Articles
February 18th ,
2011 →
10:16 am
@
admin2
Offering a broad range of cell sizes and types to meet a wide range of configurations and applications. Capacities range from 110 – 8,000 mA. Standard battery sizes as well as other sizes and/or terminal configurations are available. State-of-the-art design and meticulously controlled manufacturing ensure the highest performance levels in terms of energy density and [...]
Category :
Engineers Solutions Articles / Power Supplies, Batteries & Accessories / Technical Articles
