Free Strain Relief Solution Resource Kit

December 21st , 2011 → 6:03 pm @

Free Strain Relief Solution Resource Kit

Dee created a limited number of nice Application Strain Relief (has been known to fix headaches) Resource Kits that will allow you to quickly find a strain relief solution for your design.  If you would like a Free Strain Relief Solution Resource Kit, please send an email to MyFeedback@dee-inc.com with “Strain Relief Solution Kit” in the [...]

Category : Solution Kits

Removable Snap-In Ratcheting Strain Relief – Assembly Friendly!

August 26th , 2011 → 2:58 pm @

Removable Snap-In Ratcheting Strain Relief – Assembly Friendly!

Independent of insertion into the panel, the ratcheting strain relief self-locks onto the cable.  Thus, it may be pre-assembled offline for final assembly at a later time or remote location, for lower installed cost.  Ratcheting strain relief can be easily removed by inserting standard snap ring pliers with .040 tips into the two holes on [...]

Category : Engineers Solutions Articles / Technical Articles / Wire, Cable & Accessories

A New Lower Cost Solution for Connecting Power, Signal or Data Wires

April 20th , 2011 → 2:31 am @

A New Lower Cost Solution for Connecting Power, Signal or Data Wires

ICT Field Single Module Plastic Housing The new single module plastic housing allows any single wide module from the modular series to be mounted internally.  The housing enclosure provides IP65 protection, strain relief and quick, snap-locking tabs for easy housing connection.  The cutout for the panel-mounting base uses the same dimensions as the standard A10 series.  Additionally, [...]

Category : Interconnect Products / Phoenix Contact / Product Releases

UL Listed Multi-Hole Cord Grips

November 28th , 2010 → 12:16 pm @

UL Listed Multi-Hole Cord Grips

Cord Grips are available in ½ inch (2-5.2 millimeter holes and 3-5.6 millimeter holes) and ¾ inch (3-5.2 millimeter holes and 4-5.2 millimeter holes) sizes.  Approved by UL under file E51579 and pass the 35 lb pull test.  Benefits/characteristics include: 1. UV resistant nylon construction with TPE or Buna N sealing gland resists salt water, weak acids, gasoline, alcohol, [...]

Category : Engineers Solutions Articles / Technical Articles / Wire, Cable & Accessories

Assembly Friendly Ratcheting Strain Relief

June 23rd , 2010 → 12:37 pm @

Assembly Friendly Ratcheting Strain Relief

Independent of insertion into the panel, this ratcheting strain relief self-locks onto the cable.  Thus, it may be pre-assembled offline for final assembly at a later time, or at a remote location for lower installed cost.  Ratcheting strain relief can be easily removed by inserting standard snap ring pliers with .040 tips into the two [...]

Category : Engineers Solutions Articles / Technical Articles / Wire, Cable & Accessories

Solar Cordgrips for 1 to 13 Wires

March 19th , 2010 → 4:10 pm @

Solar Cordgrips for 1 to 13 Wires

The user can choose how many wires to use, from 1 to 13, by piercing the wire through the dimpled portion of the gland.  Accommodates USE-2 12 AWG and 10 AWG wire.  Available in two configurations: 9 – 5.5mm holes and 13 – 5.5mm holes.  Secures input PV leads from solar panel array strings to [...]

Category : Technical Articles / Wire, Cable & Accessories

Free “Finishing Products Solution Kit”

March 11th , 2010 → 4:25 pm @

Free “Finishing Products Solution Kit”

Dee has created a limited number of solution kits containing a variety of handles, caps, plugs, inserts, feet, and knobs.  Not technical stuff, but these are items that you have to have to finish your design.  They are high quality, low cost, and immediately available.  If you would like to receive this Finishing Products Solution [...]

Category : Solution Kits