How to Select a Temperature Sensor

January 16th , 2012 → 6:40 pm @

There are many variables to consider when selecting the right temperature sensor for your application, but there is a wide range of availability from which to choose a product too.  When you boil (no pun intended) all the variables down, there are basically just 3 overall criteria that need to be considered when selecting a temp [...]

Category : Engineering and Technical White Papers / White Papers

Free Strain Relief Solution Resource Kit

December 21st , 2011 → 6:03 pm @

Free Strain Relief Solution Resource Kit

Dee created a limited number of nice Application Strain Relief (has been known to fix headaches) Resource Kits that will allow you to quickly find a strain relief solution for your design.  If you would like a Free Strain Relief Solution Resource Kit, please send an email to MyFeedback@dee-inc.com with “Strain Relief Solution Kit” in the [...]

Category : Solution Kits

Free Din Rail Terminal Block Kit

December 20th , 2011 → 8:05 am @

Free Din Rail Terminal Block Kit

This kit is a sample rail of some different types of terminal blocks that may be used in Din rail applications.  These rails range from small to large blocks, and have many solution-type blocks that you may have never seen before.  To order yours, please send an email to MyFeedback@Dee-inc.com?Subject=FREE Din Rail Terminal Block Kit with [...]

Category : Solution Kits

The Key Advantages of Snap Action Switch/Sensors

December 8th , 2011 → 4:43 pm @

When it comes to performance, snap action switch/sensor technology definitely has been field-proven.  Its simple operating premise has survived decades of technological improvements and demanding environments.  Why?  Because it works.  When choosing a switch for an application, snap action should unquestionably be considered.  Besides its track record, the technology offers a long mechanical life.  Of [...]

Category : Engineering and Technical White Papers / White Papers

Free Handles Kit

November 28th , 2011 → 8:24 am @

Free Handles Kit

Eleven attractive and functional handles lines available in an extensive selection of sizes, materials, and finishes provide the right handle for applications ranging from rack-mounted equipment to stylish carrying cases.  In addition, a choice of handle ferrules is offered to reinforce and complete the installation.  To order yours, please send an email to MyFeedback@Dee-inc.comwith “FREE [...]

Category : Solution Kits

Find More Space in Your Control Panel: Tap Rules for Molded-Case Circuit Breakers: Adhering to UL Standard 508A, NEC Section 409

November 23rd , 2011 → 6:45 am @

Learn how to apply multiple branches and multi-wire terminals with circuit breakers in industrial control panels in accordance with Underwriters Laboratories (UL) standard 508A and the National Electrical Code (NEC), National Fire Protection Association (NFPA 70-2011).  Molded-case circuit breakers are used for the main overcurrent protective device (OCPD) and the main disconnecting means for an [...]

Category : Engineering and Technical White Papers / White Papers

5 Key Factors to Successful Supplier Reduction / Rationalization

November 1st , 2011 → 6:39 pm @

Reducing the supplier base is a major initiative of all equipment manufacturers.  This can be a difficult and time-consuming project.  DEE offers a white paper report regarding 5 Key Factors that facilitate effective supplier reduction projects based on observations of many OEMs, where supplier reduction was achieved with simultaneous cost savings.  If you would like [...]

Category : Supply Management White Papers / White Papers

How to Determine a Panel’s SCCR Rating

October 13th , 2011 → 6:41 pm @

 The determination of Short Circuit Current Ratings can appear to be a formidable task to complete if you are not familiar with the National Electrical Code® or the UL 508A Standard for Industrial Control Panels in the United States.  However, by breaking the task down into systematic steps, the process can be much simpler to [...]

Category : Engineering and Technical White Papers / White Papers

The 15 Key Points You Must Review When Selecting Circuit Protection

September 28th , 2011 → 7:58 am @

The 15 Key Points You Must Review When Selecting Circuit Protection

FREE Report Although care is taken to properly design electrical and electronic circuits, overcurrents in the form of short-circuits and overload can occur.  The sole purpose of fuses and circuit breakers is to protect personnel and/or equipment from serious harm when an overcurrent condition arises.  This white paper report is intended to help create a [...]

Category : White Papers

Free Cable Tie Kit

September 25th , 2011 → 2:52 pm @

Free Cable Tie Kit

Multi-color cable ties with a selection of indoor and outdoor versions.  This kit has the most common versions and makes a great addition to any Engineering room.  Stop looking around for something that will work, and reach for your Dee Electronics Cable Tie Kit.  To order yours, please send an email to MyFeedback@Dee-inc.com with “FREE Cable [...]

Category : Solution Kits