Free RoHS Din Rail Mounted Terminal Block Sample Kit

August 24th , 2010 → 10:49 am @

Free RoHS Din Rail Mounted Terminal Block Sample Kit

This kit contains the most popular sizes from 5mm – 12mm in width.  This contains terminal blocks that will handle from 22AWG – 2AWG wire.  They have screw clamp connections, and have all the approvals you will need.  These blocks range from 600 volt and 25 amps up to 600 volt at 115 amps.  VDE [...]

Category : Solution Kits

Free RoHS Compliant SMD Wire-Wound Inductor Sample Kit

July 24th , 2010 → 10:35 am @

Free RoHS Compliant SMD Wire-Wound Inductor Sample Kit

This kit contains the most popular values in sizes if 0402, 0603, 0805 and 1008.  Operating Temp from -40C to +125C with Tolerances from 2%-10%.  This kit contains spec sheets with all values listed for easy ordering information.  It comes in a 3-ring binder so you can keep on the shelf and readily available for use.  [...]

Category : Solution Kits

Free Whitepaper: “The Most Common Types of Power Disturbances and Their Causes”

July 23rd , 2010 → 12:37 pm @

Free Whitepaper: “The Most Common Types of Power Disturbances and Their Causes”

Many of the mysteries of equipment failure, downtime, and software and data corruption are the result of a problematic supply of power.  There is also a common problem with describing power problems in a standard way.  This white paper describes the most common types of power disturbances, what can cause them, what they can do [...]

Category : Engineering and Technical White Papers / White Papers

The Best Method to Measure Torque and a Primer on Torque Measurement

July 23rd , 2010 → 12:37 pm @

The Best Method to Measure Torque and a Primer on Torque Measurement

There are new developments in methods and technologies in measuring torque.  This Free Whitepaper that Dee offers recaps the latest technology and approaches for measuring torque, as well as identifies the traditional methods of measuring torque, citing pro’s and con’s, and general information.  If you would like a copy of this Free report, please send an [...]

Category : Engineering and Technical White Papers / White Papers

13 Key Problems To Avoid When Crimping Terminals

May 20th , 2010 → 8:32 am @

Crimp termination can be one of the fastest, most reliable and rugged termination methods.  However, if the terminal isn’t crimped onto the wire correctly, you can forget all about the hard work you put into selecting the right connector.  Although there are 13 common crimping problems that can reduce the reliability of your product, these [...]

Category : Engineering and Technical White Papers / White Papers

How to Dramatically Reduce Costs of Your Safety Relays

May 7th , 2010 → 4:29 am @

Original equipment manufacturers need compact, flexible safety solutions, but many safety systems on the market require complex software with expensive licensing fees.  This can deter OEMs from these products in favor of familiar, time-tested safety relays.  As a result, safety relays might be selected for an application when a safety system or safety controller is [...]

Category : Supply Management White Papers / White Papers

“The Most Important Criteria for Selecting a Proximity Sensor”

April 21st , 2010 → 1:39 pm @

Free Whitepaper Report.  Dee has written a white paper report that covers the most pertinent information that you should have when selecting a Proximity Sensor.  There are a lot of technology choices out there.  This report provides a good foundation to dial in on the correct part for your application.  If you would like a [...]

Category : Engineering and Technical White Papers / White Papers

SMD Wire-Wound Inductors Solutions Kit

March 19th , 2010 → 4:10 pm @

SMD Wire-Wound Inductors Solutions Kit

We have put together a limited quantity of these FREE Inductor Solutions kits, so if you would like one, please contact us ASAP.  They will go quickly. Inductance Range: From 1.0 nH to 10,000 nH Operating Temperature: -40°C to +125°C Inductance Tolerance: ±2%, ±3%, ±5%, ±10%, and ±20% Each kit contains several samples of popular values available within [...]

Category : Solution Kits

Circuit Breaker and Supplementary Protectors Standards, Codes, Specifications and Terminology Guide

January 26th , 2010 → 11:01 am @

Circuit Breaker and Supplementary Protectors Standards, Codes, Specifications and Terminology Guide

This report has been developed to provide a quick overview and reference guide with respect to the Standards, Codes, Specifications, and Terminology involved with Circuit Breakers and Supplementary Protectors.

Category : Engineering and Technical White Papers / Guides & References / White Papers

Free – Double Row Terminal Block Solution Sample Kit

January 8th , 2010 → 11:24 am @

Free – Double Row Terminal Block Solution Sample Kit

Dee has created a limited number of Double Row Terminal Block Solution Kits.  These kits contain terminal blocks ranging from 5 amps up to 90 amps and voltage ratings of 150 volts – 600 volts.  They also have some accessories like jumpers and quick connect tabs.  If you would like to receive this kit, please [...]

Category : Solution Kits