Browsing Tag »Connectors
March 16th ,
2012 →
3:41 pm
@
admin2
These IP67 rated connectors are available in three configurations; D-Sub Backshell Kit, D-Sub Panel Mount Connector, and D-Sub Connector Cap. Features & Benefits: *rear mounting panel connectors fit into standard D-Sub holes. *Connectors are available in solder cup, male and female version. *Gold plated contacts are standard. *Backshell kits available for cable diameters 0.138 – [...]
Category :
Engineers Solutions Articles / Interconnect Products / Technical Articles
February 27th ,
2012 →
2:42 pm
@
admin2
This kit contains a few different XLR connectors. 3-pin with gold or silver contacts and black and silver bodies. These are high-quality, low-cost and can replace most Neutrik/Switchcraft type connectors. To order yours, please send an email to MyFeedback@Dee-inc.com with “FREE XLR Connector Kit” in the subject line, and be sure to include your contact information.
Category :
Solution Kits
February 20th ,
2012 →
3:17 pm
@
admin2
Push-pull products fits a wide variety of applications due to the connector’s small size and quick connect/disconnect-like design. These features make them ideally suited for commercial, medical and similar industries. Available in 3 different series; *micro – with a maximum OD of only 9.5mm with 3 to 5 contacts, *sub-miniature – with only an OD [...]
Category :
Engineers Solutions Articles / Interconnect Products / Technical Articles
February 20th ,
2012 →
3:17 pm
@
admin2
A round bore type of aluminum flanged connector clamps in metric sizes. These RoHS compliant connector clamps are available in black powder coated, textured finish, or tumbled with a matte shot-blasted finish. Cap screws are DIN 912, steel, zinc plated, and nylon insert hex nuts are DIN 985, steel, zinc plated. The clamping bores are [...]
Category :
Engineers Solutions Articles / Production Tools Equipment and Supplies / Technical Articles
November 21st ,
2011 →
6:03 pm
@
admin2
The panel-mounted receptacles can be rotated during installation to allow a right-angle cordset to connect in a desired angular position. These M12 A- and B-coded connectors are commonly used for industrial networks and automation applications in harsh environments. The new receptacles are available in both male and female versions and prewired with 200mm wires. The [...]
Category :
Engineers Solutions Articles / Interconnect Products / Technical Articles
November 21st ,
2011 →
6:03 pm
@
admin2
This unique connector system incorporates many of the features previously found only on large power connectors. These connectors are the perfect choice when you need compact connectors that can carry up to 5.0A of current. They are available in circuit sizes 2 to 24 for wire-to-board and wire-to-wire applications offered in through-hole and SMT options. [...]
Category :
Engineers Solutions Articles / Interconnect Products / Technical Articles
October 1st ,
2011 →
1:11 pm
@
admin2
Flexi-Mate™ Connector System Designed to meet the backlighting needs of LED TVs and room lighting applications, this new family of connectors is the first of its kind on the market to provide a full range of both board-to-board and wire-to-board solutions. These connectors are designed for LED TVs and standard room-lighting applications requiring the placement of LEDs on [...]
Category :
Interconnect Products / Molex / Product Releases
October 1st ,
2011 →
1:11 pm
@
admin2
Sealed Connector System The pre-assembled, fully-submersible connector system is a high-performance connector system; offering a reduced package size and is ideal for SAE- and ISO-style wire in single- and dual-row configurations up to 22.0A supporting both signal and power applications for on-engine automotive to off-road construction equipment applications Based on the 1.50mm ISO blade-type terminal system, the [...]
Category :
Interconnect Products / Molex / Product Releases
September 25th ,
2011 →
2:33 pm
@
admin2
The multi-drop sealed connector and cable system features rugged IP-66 and IP-67 interface seals using field-termination cable-pierce technology to offer a simple, free-form, pluggable connector string for internal and external data/signal and power applications. Customizable, free-form, modular assembly design which provides maximum design flexibility. Pluggable connector can be mated/unmated during installation for re-use, repair or [...]
Category :
Engineers Solutions Articles / Interconnect Products / Technical Articles
September 25th ,
2011 →
2:33 pm
@
admin2
An industry award winning design PCB connector with all the advantages a designer could want. This unique edge-mount RF connector ensures the integrity of video and data in the broadest spectrum of HDTV, MATV, CCTV and GPS applications. This new version was developed to meet the larger bandwidth applications that are now being developed in [...]
Category :
Engineers Solutions Articles / Interconnect Products / Technical Articles
