December 21st , 2011 → 6:03 pm @ admin2
Dee created a limited number of nice Application Strain Relief (has been known to fix headaches) Resource Kits that will allow you to quickly find a strain relief solution for your design. If you would like a Free Strain Relief Solution Resource Kit, please send an email to MyFeedback@dee-inc.com with “Strain Relief Solution Kit” in the [...]
Category : Solution Kits
August 26th , 2011 → 2:58 pm @ admin2
Independent of insertion into the panel, the ratcheting strain relief self-locks onto the cable. Thus, it may be pre-assembled offline for final assembly at a later time or remote location, for lower installed cost. Ratcheting strain relief can be easily removed by inserting standard snap ring pliers with .040 tips into the two holes on [...]
Category : Engineers Solutions Articles / Technical Articles / Wire, Cable & Accessories
December 21st , 2010 → 10:21 am @ admin2
With an extra internal insulating sleeve that creates a smooth bore and prevents locking fingers from protruding into the ID of the bushing. They are used to protect through-holes to eliminate sharp edges so wires are protected. Absorbs vibration, and cushions and insulates wires. They also can be used as a bushing for rotating shafts. [...]
Category : Engineers Solutions Articles / Technical Articles / Wire, Cable & Accessories
November 28th , 2010 → 12:16 pm @ admin2
Cord Grips are available in ½ inch (2-5.2 millimeter holes and 3-5.6 millimeter holes) and ¾ inch (3-5.2 millimeter holes and 4-5.2 millimeter holes) sizes. Approved by UL under file E51579 and pass the 35 lb pull test. Benefits/characteristics include: 1. UV resistant nylon construction with TPE or Buna N sealing gland resists salt water, weak acids, gasoline, alcohol, [...]
Category : Engineers Solutions Articles / Technical Articles / Wire, Cable & Accessories
June 23rd , 2010 → 12:37 pm @ admin2
Independent of insertion into the panel, this ratcheting strain relief self-locks onto the cable. Thus, it may be pre-assembled offline for final assembly at a later time, or at a remote location for lower installed cost. Ratcheting strain relief can be easily removed by inserting standard snap ring pliers with .040 tips into the two [...]
Category : Engineers Solutions Articles / Technical Articles / Wire, Cable & Accessories
March 19th , 2010 → 4:10 pm @ admin2
The user can choose how many wires to use, from 1 to 13, by piercing the wire through the dimpled portion of the gland. Accommodates USE-2 12 AWG and 10 AWG wire. Available in two configurations: 9 – 5.5mm holes and 13 – 5.5mm holes. Secures input PV leads from solar panel array strings to [...]
Category : Technical Articles / Wire, Cable & Accessories
March 11th , 2010 → 4:25 pm @ admin2
Dee has created a limited number of solution kits containing a variety of handles, caps, plugs, inserts, feet, and knobs. Not technical stuff, but these are items that you have to have to finish your design. They are high quality, low cost, and immediately available. If you would like to receive this Finishing Products Solution [...]
Category : Solution Kits
July 21st , 2009 → 8:53 am @ admin2
This new line of combiner box cord grips houses multiple wires at one entry point providing a liquid tight seal around each wire and at the panel. This is ideal when individual conductors for power or control are used rather than a jacketed cable. It features a secure “click in place” fit that reduces tightening [...]
Category : Engineers Solutions Articles / Technical Articles / Wire, Cable & Accessories
Subscribe to our Newsletter
