December 19th , 2011 → 6:02 pm @ admin2
Dee Electronics has gone above and beyond the call of duty by performing a free Cost Savings Walkthrough for us. They spent several hours helping us identify areas of our business where we could save money. As an immediate result of this teamwork, we identified a quick and easy $38,000 annual savings on just three [...]
Category : Client Testimonials - Engineers / Testimonials
December 19th , 2011 → 4:02 pm @ admin2
Engineered to deliver reliable performance in a wide range of applications from UPS systems to cranes to transportation to communication systems. Ratings are 125V (1 pole) and 250V (2 poles) up to 63A. They enable service entrance, feeder, or branch circuit protection and disconnect function. They are compact at 17.5 mm wide per pole. Their [...]
Category : Engineers Solutions Articles / Heat & Circuit Protection / Technical Articles
December 19th , 2011 → 4:02 pm @ admin2
These pressure sensors are ideally suited for environmentally demanding industrial applications. Using a 5.0 V excitation input, this series of sensors provide a .5-4.5 V signal output proportional to pressure. This design requires no end-user amplification. Features include: corrosion-resistant stainless steel housing, 0–15 PSI to 0–500 PSI, weatherproof integral electrical connector, low total error; ±1.5% full–scale [...]
Category : Engineers Solutions Articles / Switches & Relays / Technical Articles
December 19th , 2011 → 4:02 pm @ admin2
Prepare your eyes for a look at our new 0603 SMD with a dome lens. With its 1.6mm × 0.8mm footprint and 0.95mm height, it is a bright source of directed light from a package small enough to lose if you just blink too hard. Its 60° narrow viewing angle allows for greater intensity output [...]
Category : Engineers Solutions Articles / Lighting Products/Opto/LEDs / Technical Articles
December 1st , 2011 → 6:39 pm @ admin2
How to Reduce your Part Cost without Negotiating – Free White Paper Report We have compiled a list of techniques and areas that provide a sort of “checklist” that can be used when trying to reduce the cost of a given component, but they do not require negotiating with the supplier or vendor. Essentially, these are proven [...]
Category : Purchasing / Materials Management Whitepapers / Supply Management White Papers / White Papers
November 21st , 2011 → 6:03 pm @ admin2
With an integral sealing ring that ensures a superior seal every time at mounting hole location and are IP68 rated. They provide a liquid-tight seal up to 70 PSI and can be used for hydraulic and pneumatic applications. Non-corrosive/resistant against salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. They resist oil and heat up [...]
Category : Engineers Solutions Articles / Technical Articles / Wire, Cable & Accessories
November 15th , 2011 → 2:11 pm @ admin2
This vertically mounted float transducer series offers a reliable and economical means of tank level monitoring suitable for a wide variety of applications and liquids. Available with either brass or 316 stainless steel mounts and stainless, polypropylene or Buna-N floats, the C3957 features a 5mm resolution, while the C3946 offers a 10mm resolution. Each model has a simple [...]
Category : Product Releases / Sensors
November 1st , 2011 → 6:39 pm @ admin2
Reducing the supplier base is a major initiative of all equipment manufacturers. This can be a difficult and time-consuming project. DEE offers a white paper report regarding 5 Key Factors that facilitate effective supplier reduction projects based on observations of many OEMs, where supplier reduction was achieved with simultaneous cost savings. If you would like [...]
Category : Supply Management White Papers / White Papers
October 1st , 2011 → 1:11 pm @ admin2
Sealed Connector System The pre-assembled, fully-submersible connector system is a high-performance connector system; offering a reduced package size and is ideal for SAE- and ISO-style wire in single- and dual-row configurations up to 22.0A supporting both signal and power applications for on-engine automotive to off-road construction equipment applications Based on the 1.50mm ISO blade-type terminal system, the [...]
Category : Interconnect Products / Molex / Product Releases
September 25th , 2011 → 2:33 pm @ admin2
These converters are available in both 0.74 × 0.50 × 0.33 inch DIP and SMT packages and have a weight of only 0.16oz. Available in 2:1 input voltage ranges of 4.5-9, 9-18, 18-36, or 36-75VDC and 4:1 input voltage ranges of 4.5-18, 9-36, or 18-75VDC. They have 3.3, 5, 9, 12, and 15VDC single output [...]
Category : Engineers Solutions Articles / Power Supplies, Batteries & Accessories / Technical Articles
Subscribe to our Newsletter
