Browsing Tag »Din Rail Mountable
April 16th ,
2009 →
11:37 am
@
admin2
Industrial Enclosures are available in abroad spectrum of design needs, including clamped covers, ¼ turn latch covers, window doors, dual access, panel mounting, DIN rail mounting, 19” rack mounting, etc. From small junction boxes to 5 door freestanding enclosures, we have your size. Most designs are also available in both indoor (NEMA 12) and outdoor [...]
Category :
Engineers Solutions Articles / Production Tools Equipment and Supplies / Technical Articles
February 17th ,
2009 →
11:25 am
@
admin2
This single pole, thermal-magnetic breaker is only 12.5 mm wide, and is available in current ratings from 0.1 A - 32 A. These are available with four available trip characteristics. The range of versions allows exact specification of continuous loads and inrush currents, load circuits, and cable cross sections specific to individual user requirements. UL 489 and [...]
Category :
Engineers Solutions Articles / Heat & Circuit Protection / Technical Articles
February 17th ,
2009 →
11:25 am
@
admin2
This control panel transformer series is designed specifically for high-inrush applications that require reliable output voltage stability. They are a cost-effective and easy-to-install power distribution and supply solution. The transformers maximize inrush capability and output voltage regulation when electromagnetic devices are initially energized. They feature a unique DIN rail-mount foot, or they can be panel-mounted. [...]
Category :
Engineers Solutions Articles / Inductors, Transformers & Coils / Technical Articles
January 13th ,
2009 →
1:51 pm
@
admin2
This remarkably compact Electronic Circuit Protector is just 2.76” H by 0.5“ W, and allows direct mounting on a 35 mm din rail. It combines electronic trip characteristics and active current limitation to allow selective disconnection of loads connected to 24VDC power supplies. Selective load protection prevents complete shutdown of the system by quickly disconnecting [...]
Category :
Engineers Solutions Articles / Heat & Circuit Protection / Technical Articles
December 9th ,
2008 →
9:08 am
@
admin2
This solid state motor starter combines the functionality of four separate devices in one. The 4-in-1 replaces the need for two contactors for reversing motors or redundancy applications. In addition to replacing contactors, this product has integrated motor overload protection to allow for use in other starter applications. 4-in-1 describes the four different functional areas [...]
Category :
Engineers Solutions Articles / Interconnect Products / Technical Articles
November 17th ,
2008 →
8:48 am
@
admin2
The value and functionality of these screw connection terminal blocks has just increased with the addition of knife disconnect, feed-through, and component blocks in 2.5 mm. The compact design with uniform dual-bridge channel delivers distribution functionality quickly and effectively. The base block accommodates disconnect, component and fuse plugs, while saving valuable space on the DIN [...]
Category :
Engineers Solutions Articles / Interconnect Products / Technical Articles
November 17th ,
2008 →
8:48 am
@
admin2
Samples should be available soon for these new, UL listed, enclosed power blocks. They were developed to provide a small profile block in feeder circuits with high Short Circuit Current Ratings (SCCR) up to 65kA, along with UL approvals for use with flexible stranded wire Classes G, H, I, or K. Mounting options consist of [...]
Category :
Engineers Solutions Articles / Interconnect Products / Technical Articles
