Browsing Tag »Engineer Solutions
January 16th ,
2012 →
6:40 pm
@
admin2
There are many variables to consider when selecting the right temperature sensor for your application, but there is a wide range of availability from which to choose a product too. When you boil (no pun intended) all the variables down, there are basically just 3 overall criteria that need to be considered when selecting a temp [...]
Category :
Engineering and Technical White Papers / White Papers
December 21st ,
2011 →
6:03 pm
@
admin2
Dee Electronics has made available a White Paper Report outlining the 12 biggest mistakes to avoid when selecting Circuit Protection or Circuit Breakers for your application. It’s only a circuit breaker, right? Yet there is enough complexity and confusion when it comes to specifying circuit protection that many engineers are designing equipment with too little [...]
Category :
Engineering and Technical White Papers / White Papers
December 20th ,
2011 →
8:05 am
@
admin2
This kit is a sample rail of some different types of terminal blocks that may be used in Din rail applications. These rails range from small to large blocks, and have many solution-type blocks that you may have never seen before. To order yours, please send an email to MyFeedback@Dee-inc.com?Subject=FREE Din Rail Terminal Block Kit with [...]
Category :
Solution Kits
December 19th ,
2011 →
6:02 pm
@
admin2
Dee Electronics has gone above and beyond the call of duty by performing a free Cost Savings Walkthrough for us. They spent several hours helping us identify areas of our business where we could save money. As an immediate result of this teamwork, we identified a quick and easy $38,000 annual savings on just three [...]
Category :
Client Testimonials - Engineers / Testimonials
December 19th ,
2011 →
4:02 pm
@
admin2
These fuse holders are ideal for panel boards, feeder circuits, HVAC and bus duct applications, and are suitable for applications that required IP20 touchsafe designs. Specifications: 600 volts, 30-60 amps, base materials: thermoplastic, tested and approved for 200,000 amp short circuit current rating (SCCR), touchsafe IEC type design (IP20), blown fuse indicating type available, red dual [...]
Category :
Heat & Circuit Protection / Technical Articles
December 19th ,
2011 →
4:02 pm
@
admin2
This switch is encased in a metal die-cast housing for industrial strength durability. It offers multiple color options in a stylish design. This illuminated pushbutton switch features a threaded panel mount and is sealed to IP65 ratings. It also has a long life expectancy with 500,000 operating life cycles. This switch is a great product [...]
Category :
Engineers Solutions Articles / Switches & Relays / Technical Articles
December 19th ,
2011 →
4:02 pm
@
admin2
Engineered to deliver reliable performance in a wide range of applications from UPS systems to cranes to transportation to communication systems. Ratings are 125V (1 pole) and 250V (2 poles) up to 63A. They enable service entrance, feeder, or branch circuit protection and disconnect function. They are compact at 17.5 mm wide per pole. Their [...]
Category :
Engineers Solutions Articles / Heat & Circuit Protection / Technical Articles
December 19th ,
2011 →
4:02 pm
@
admin2
This series consists of constant voltage DC/DC converters with non-regulated single outputs. This series can deliver up to 3A of output current in a small, open-frame SIP package. These converters have output power ranging from 1.8 to 45 Watts, and operate over input voltage ranges of 2.5-5.5, 4.5-14, and 10-30VDC. They are ideal for a [...]
Category :
Engineers Solutions Articles / Power Supplies, Batteries & Accessories / Technical Articles
December 19th ,
2011 →
4:02 pm
@
admin2
These pressure sensors are ideally suited for environmentally demanding industrial applications. Using a 5.0 V excitation input, this series of sensors provide a .5-4.5 V signal output proportional to pressure. This design requires no end-user amplification. Features include: corrosion-resistant stainless steel housing, 0–15 PSI to 0–500 PSI, weatherproof integral electrical connector, low total error; ±1.5% full–scale [...]
Category :
Engineers Solutions Articles / Switches & Relays / Technical Articles
December 19th ,
2011 →
4:02 pm
@
admin2
Prepare your eyes for a look at our new 0603 SMD with a dome lens. With its 1.6mm × 0.8mm footprint and 0.95mm height, it is a bright source of directed light from a package small enough to lose if you just blink too hard. Its 60° narrow viewing angle allows for greater intensity output [...]
Category :
Engineers Solutions Articles / Lighting Products/Opto/LEDs / Technical Articles