Browsing Tag »Engineer Solutions
December 19th ,
2011 →
4:02 pm
@
admin2
These fuse holders are ideal for panel boards, feeder circuits, HVAC and bus duct applications, and are suitable for applications that required IP20 touchsafe designs. Specifications: 600 volts, 30-60 amps, base materials: thermoplastic, tested and approved for 200,000 amp short circuit current rating (SCCR), touchsafe IEC type design (IP20), blown fuse indicating type available, red dual [...]
Category :
Heat & Circuit Protection / Technical Articles
December 19th ,
2011 →
4:02 pm
@
admin2
This switch is encased in a metal die-cast housing for industrial strength durability. It offers multiple color options in a stylish design. This illuminated pushbutton switch features a threaded panel mount and is sealed to IP65 ratings. It also has a long life expectancy with 500,000 operating life cycles. This switch is a great product [...]
Category :
Engineers Solutions Articles / Switches & Relays / Technical Articles
December 19th ,
2011 →
4:02 pm
@
admin2
Engineered to deliver reliable performance in a wide range of applications from UPS systems to cranes to transportation to communication systems. Ratings are 125V (1 pole) and 250V (2 poles) up to 63A. They enable service entrance, feeder, or branch circuit protection and disconnect function. They are compact at 17.5 mm wide per pole. Their [...]
Category :
Engineers Solutions Articles / Heat & Circuit Protection / Technical Articles
December 19th ,
2011 →
4:02 pm
@
admin2
This series consists of constant voltage DC/DC converters with non-regulated single outputs. This series can deliver up to 3A of output current in a small, open-frame SIP package. These converters have output power ranging from 1.8 to 45 Watts, and operate over input voltage ranges of 2.5-5.5, 4.5-14, and 10-30VDC. They are ideal for a [...]
Category :
Engineers Solutions Articles / Power Supplies, Batteries & Accessories / Technical Articles
December 19th ,
2011 →
4:02 pm
@
admin2
These pressure sensors are ideally suited for environmentally demanding industrial applications. Using a 5.0 V excitation input, this series of sensors provide a .5-4.5 V signal output proportional to pressure. This design requires no end-user amplification. Features include: corrosion-resistant stainless steel housing, 0–15 PSI to 0–500 PSI, weatherproof integral electrical connector, low total error; ±1.5% full–scale [...]
Category :
Engineers Solutions Articles / Switches & Relays / Technical Articles
December 19th ,
2011 →
4:02 pm
@
admin2
Prepare your eyes for a look at our new 0603 SMD with a dome lens. With its 1.6mm × 0.8mm footprint and 0.95mm height, it is a bright source of directed light from a package small enough to lose if you just blink too hard. Its 60° narrow viewing angle allows for greater intensity output [...]
Category :
Engineers Solutions Articles / Lighting Products/Opto/LEDs / Technical Articles
November 28th ,
2011 →
8:24 am
@
admin2
Eleven attractive and functional handles lines available in an extensive selection of sizes, materials, and finishes provide the right handle for applications ranging from rack-mounted equipment to stylish carrying cases. In addition, a choice of handle ferrules is offered to reinforce and complete the installation. To order yours, please send an email to MyFeedback@Dee-inc.comwith “FREE [...]
Category :
Solution Kits
November 22nd ,
2011 →
9:41 am
@
admin2
I have worked with Dee Electronics for several years and consider them one of our Engineering Partners. I know I can count on them to help get the job done. Dee has been involved in a number of projects both at the component level as well as more complex assembly projects. They have always been [...]
Category :
Client Testimonials - Engineers / Testimonials
November 21st ,
2011 →
6:03 pm
@
admin2
A compact design with high saturation currents for POL converters and DC/DC converters for high current power supplies. These SMD power inductors are available in five sizes (4020, 7030, 7050 1040, and 1335). They handle high transient current spikes with no acoustic noise and no leakage field. They are magnetically shielded and have a high [...]
Category :
Engineers Solutions Articles / Inductors, Transformers & Coils / Technical Articles
November 21st ,
2011 →
6:03 pm
@
admin2
This series consists of 3.3V, 5V, 12V, 15V, 24V, 28V, and 48VDC single output models that operate over 4:1 input voltage ranges of 9-36VDC and 18-75VDC. Size is an industry standard 2.40” × 2.28” × 0.50” half-brick package and footprint. Standard features include high efficiency up to 90%, soft start, adjustable output voltage, remote sense, [...]
Category :
Engineers Solutions Articles / Power Supplies, Batteries & Accessories / Technical Articles
