December 21st , 2011 → 6:03 pm @ admin2
Dee created a limited number of nice Application Strain Relief (has been known to fix headaches) Resource Kits that will allow you to quickly find a strain relief solution for your design. If you would like a Free Strain Relief Solution Resource Kit, please send an email to MyFeedback@dee-inc.com with “Strain Relief Solution Kit” in the [...]
Category : Solution Kits
November 21st , 2011 → 6:03 pm @ admin2
With an integral sealing ring that ensures a superior seal every time at mounting hole location and are IP68 rated. They provide a liquid-tight seal up to 70 PSI and can be used for hydraulic and pneumatic applications. Non-corrosive/resistant against salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. They resist oil and heat up [...]
Category : Engineers Solutions Articles / Technical Articles / Wire, Cable & Accessories
October 23rd , 2011 → 6:03 pm @ admin2
This corrugated tubing has sizes of 3/8˝ to 1˝, flame retardant, so it won’t burn and nontoxic and UV resistant. Rated for NEMA 4 and 4X applications when used with liquid tight fittings. Rated for NEMA type 3R applications. With maximum flexibility, it can be used in extremely tight quarters with a bend radius equal [...]
Category : Engineers Solutions Articles / Technical Articles / Wire, Cable & Accessories
August 26th , 2011 → 2:58 pm @ admin2
Independent of insertion into the panel, the ratcheting strain relief self-locks onto the cable. Thus, it may be pre-assembled offline for final assembly at a later time or remote location, for lower installed cost. Ratcheting strain relief can be easily removed by inserting standard snap ring pliers with .040 tips into the two holes on [...]
Category : Engineers Solutions Articles / Technical Articles / Wire, Cable & Accessories
August 26th , 2011 → 2:58 pm @ admin2
These cable ties are extremely durable and the smooth, vinyl-jacketing (black vinyl jacketed 302/304 stainless steel wire) prevents damage to installation cable insulation. They have a tin-plated copper crimp sleeve for easy field installation. The UV-protected vinyl jacket is excellent for solar installation where product durability is required. They are available in 4 lengths that [...]
Category : Engineers Solutions Articles / Technical Articles / Wire, Cable & Accessories
February 18th , 2011 → 10:16 am @ admin2
These junction boxes are low-cost two-piece construction for potted applications. They are designed for USE-1 and 1000V PV wire. The lid securely snaps on without use of tools, which speeds panel fabrication. The low-profile design minimizes use of potting material while permitting ample access for electrical connections. Durably constructed of high temperature polycarbonate with 5VA [...]
Category : Engineers Solutions Articles / Technical Articles / Wire, Cable & Accessories
December 21st , 2010 → 10:21 am @ admin2
With an extra internal insulating sleeve that creates a smooth bore and prevents locking fingers from protruding into the ID of the bushing. They are used to protect through-holes to eliminate sharp edges so wires are protected. Absorbs vibration, and cushions and insulates wires. They also can be used as a bushing for rotating shafts. [...]
Category : Engineers Solutions Articles / Technical Articles / Wire, Cable & Accessories
November 28th , 2010 → 12:16 pm @ admin2
Cord Grips are available in ½ inch (2-5.2 millimeter holes and 3-5.6 millimeter holes) and ¾ inch (3-5.2 millimeter holes and 4-5.2 millimeter holes) sizes. Approved by UL under file E51579 and pass the 35 lb pull test. Benefits/characteristics include: 1. UV resistant nylon construction with TPE or Buna N sealing gland resists salt water, weak acids, gasoline, alcohol, [...]
Category : Engineers Solutions Articles / Technical Articles / Wire, Cable & Accessories
July 24th , 2010 → 10:35 am @ admin2
These boxes feature a low profile design that maximizes usable solar panel collector space and low insertion force connectors that make panel connections easy and less costly. Features include: highest performance rated axial diode on the market for a single diode box application, sizeable opening for conductor ribbons, low insertion force connection of PV ribbons [...]
Category : Engineers Solutions Articles / Technical Articles / Wire, Cable & Accessories
June 23rd , 2010 → 12:37 pm @ admin2
Independent of insertion into the panel, this ratcheting strain relief self-locks onto the cable. Thus, it may be pre-assembled offline for final assembly at a later time, or at a remote location for lower installed cost. Ratcheting strain relief can be easily removed by inserting standard snap ring pliers with .040 tips into the two [...]
Category : Engineers Solutions Articles / Technical Articles / Wire, Cable & Accessories
Subscribe to our Newsletter
