Browsing Tag »IP68
January 27th ,
2012 →
2:42 pm
@
admin2
These transparent sealing boots mate with most popular lever-operated thermal and magnetic circuit breakers. Their flexible covers are molded in a proprietary silicone rubber, preventing long-term yellowing with a high level of resistance to UV. These extreme environmental sealing boots, rated at IP66/68 with 10,000 actuation-life minimum, will provide protection against penetration from harsh contaminants, [...]
Category :
Engineers Solutions Articles / Production Tools Equipment and Supplies / Technical Articles
January 27th ,
2012 →
2:42 pm
@
admin2
The ultimate in liquid-tight strain relief protection. They provide the durability of a nickel-plated brass enclosure with drastically lower installed cost and more secure wire gripping with nylon finger design. They make it possible to insert different diameters of cable in the same cable gland easily, flexibly, and with a good seal. Multiple sizes available [...]
Category :
Engineers Solutions Articles / Technical Articles / Wire, Cable & Accessories
November 21st ,
2011 →
6:03 pm
@
admin2
The panel-mounted receptacles can be rotated during installation to allow a right-angle cordset to connect in a desired angular position. These M12 A- and B-coded connectors are commonly used for industrial networks and automation applications in harsh environments. The new receptacles are available in both male and female versions and prewired with 200mm wires. The [...]
Category :
Engineers Solutions Articles / Interconnect Products / Technical Articles
November 21st ,
2011 →
6:03 pm
@
admin2
With an integral sealing ring that ensures a superior seal every time at mounting hole location and are IP68 rated. They provide a liquid-tight seal up to 70 PSI and can be used for hydraulic and pneumatic applications. Non-corrosive/resistant against salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. They resist oil and heat up [...]
Category :
Engineers Solutions Articles / Technical Articles / Wire, Cable & Accessories
August 26th ,
2011 →
2:58 pm
@
admin2
Rugged construction makes this cable assembly perfect for harsh environments. With an IP68 rating, even outdoor equipment can be fully protected when using this cable assembly. Great for high-power applications, as this cable assembly can operate up to 30 amps @ 600V. Features and benefits include: 2 thru 4 position “D” size, up to 30 [...]
Category :
Engineers Solutions Articles / Technical Articles / Wire, Cable & Accessories
July 30th ,
2011 →
10:16 am
@
admin2
New high-flex M12 cordsets can flex up to 15 million bend-cycles. The sensor/actuator cables (SACs) meet the rigorous demands of robotics, motion and C-track installations, where cables need torosional and bending strength beyond standard PUR cable material. The flexible cordsets’ gray PUR jacket is welding slag-resistant, so that it can flex, bend and twist during [...]
Category :
Interconnect Products / Phoenix Contact / Product Releases
April 18th ,
2011 →
12:11 pm
@
admin2
IP66/68 ingress rated (with pressure range exceeding 15 PSI internal and 1,500 PSI external) is only part of the story. The fact that the boot’s exterior is constructed of no. 300 stainless steel providing an armor plate thick enough to resist high-pressure wash downs and high temperatures utilized in food, beverage, dairy, pharmaceutical, petrochemical processing industries, and [...]
Category :
Engineers Solutions Articles / Switches & Relays / Technical Articles
March 20th ,
2011 →
12:13 pm
@
admin2
M12 High-Flex Cordsets In the areas of robotics, motion systems and Ctrack, a cable is often required to flex, bend and twist continuously during the manufacturing process. For this reason, highly flexible cables are needed with torsional and bending strength over and above that of the normal PUR cable material. high-flex M12 cordsets are now offered as [...]
Category :
Interconnect Products / Phoenix Contact / Product Releases
December 18th ,
2010 →
4:00 pm
@
admin2
Announcing Self-Sealing Washers to this Growing Family of Reusable, Self-Sealing Fastener Assembly Hardware These standard, self-sealing washers feature a silicone rubber section bonded to a specially-formed stainless-steel washer. Pressure range exceeds 100 PSI internal/external, and is UL recognized for NEMA 4x type 6 ratings with an IP 66/68 rating. Other sealing materials and sizes, including metric, are [...]
Category :
APM Hexseal / Product Releases / Production Tools, Equipment, & Supplies
December 18th ,
2010 →
4:00 pm
@
admin2
High-Pressure, High-Temperature Pushbutton Switch Sealing Boots Take Aim at High Water Pressure and Temperature Wash Downs & Rough Handling Conditions Designed to handle external pressures to 1,500 PSI (103bar), and temperatures from -80°F to +400°F (-62°C to +204°C) is only part of the story. The external actuator mechanism is armor plated with 300 series stainless steel [...]
Category :
APM Hexseal / Product Releases / Production Tools, Equipment, & Supplies
