Browsing Tag »Power Supply
July 23rd ,
2010 →
12:37 pm
@
admin2
Many of the mysteries of equipment failure, downtime, and software and data corruption are the result of a problematic supply of power. There is also a common problem with describing power problems in a standard way. This white paper describes the most common types of power disturbances, what can cause them, what they can do [...]
Category :
Engineering and Technical White Papers / White Papers
June 18th ,
2010 →
7:38 am
@
admin2
Filtered Power Entry Module – Series 5008 Schurter’s new 5008 series combines an IEC C8 appliance inlet and line filter for use in Class II information technology, medical and entertainment appliances. Rated up to 6A at 250 VAC, the new series is ideally suited for downsizing appliances. The integrated EMI filter mounted at the point [...]
Category :
Circuit Protection / Product Releases / Schurter
June 2nd ,
2010 →
2:32 am
@
admin2
INTERFACE STEP 2 12 AND 24 V DC Variant Additions Phoenix Contact introduces three new variants to the second generation of STEP power supplies. The new power supplies are available as 24 V DC/0.5 A and 12 V DC/1 A versions, as well as a 12 V DC/1.5 A model with a shallow-depth design. These [...]
Category :
Interconnect Products / Phoenix Contact / Product Releases
March 19th ,
2010 →
4:10 pm
@
admin2
With its 48 V DC/10 A power, this power supply extends the range of applications where Selective Fuse Breaking (SFB) technology can be implemented. Features include: Din rail or wall mountable, worldwide input voltage range (85-264 V AC and 90-350 V DC), adjustable output voltage of 30-56 V DC for a wide range of applications, Power [...]
Category :
Power Supplies, Batteries & Accessories / Technical Articles
January 14th ,
2010 →
12:53 pm
@
admin2
Our latest offering to our expanding line of DIN Rail Power Supplies Universal AC input 90-264V High efficiency, up to 94% and low power dissipation 150% peak load capability Short circuit protection Overload protection Over voltage protection Over temperature protection Cooling by free air convection Compact size DIN rail mounting UL 508 (industrial control [...]
Category :
Altech Corporation / Power Supplies, Batteries & Accessories / Product Releases
January 11th ,
2010 →
1:48 pm
@
admin2
When used in “PC Mode” with an industrial PC, the TRIO-UPS has an adjustable DC voltage output time function. This allows the user to ride through short duration interruptions of main power without resetting the PC with the remote reset function commonly implemented with industrial PCs. Additionally, after the PC is safely shut down during [...]
Category :
Engineers Solutions Articles / Power Supplies, Batteries & Accessories / Technical Articles
January 11th ,
2010 →
1:04 pm
@
admin2
Designed and manufactured for the high performance power supply market. Featuring up to 94% efficiency rating, they can provide a 100% of the continuously rated power with a 150% peak power for 3 seconds. With an active PFC function built-in (PF>0.93) – they fulfill the requirement of the EN61000-3-2 for harmonic current so it can [...]
Category :
Engineers Solutions Articles / Power Supplies, Batteries & Accessories / Technical Articles
July 21st ,
2009 →
2:55 pm
@
admin2
This new series of compact, open frame constructed, AC/DC medical power supplies provide 30 watts of continuous output power. With its small size of 1.5 × 4 × 0.84 inches, it is well suited for use in home health care and portable applications. It has a wide input voltage of 90 to 264V AC; 47 to 63Hz. [...]
Category :
Engineers Solutions Articles / Power Supplies, Batteries & Accessories / Technical Articles
July 21st ,
2009 →
8:53 am
@
admin2
Dee is excited to introduce a new DIN rail power supply in the popular 20 amp single-phase 24VDC to extend its line of power supplies. Combining a remarkably smaller package with higher efficiency than the existing line, these units also have unique visual diagnostic LEDs to show status at a glance. They feature Active Power [...]
Category :
Engineers Solutions Articles / Power Supplies, Batteries & Accessories / Technical Articles
May 21st ,
2009 →
12:05 pm
@
admin2
The completely redesigned STEP power supplies now include increased capacity and expanded features, making them suitable for a wide variety of applications that require reliable output in a compact package. The robust voltage versus current output characteristics allows the power supply to start up heavier capacitive loads without losing output capacity. With this new feature, [...]
Category :
Engineers Solutions Articles / Power Supplies, Batteries & Accessories / Technical Articles
