December 21st , 2011 → 6:03 pm @ admin2
Dee created a limited number of nice Application Strain Relief (has been known to fix headaches) Resource Kits that will allow you to quickly find a strain relief solution for your design. If you would like a Free Strain Relief Solution Resource Kit, please send an email to MyFeedback@dee-inc.com with “Strain Relief Solution Kit” in the [...]
Category : Solution Kits
September 25th , 2011 → 2:52 pm @ admin2
Multi-color cable ties with a selection of indoor and outdoor versions. This kit has the most common versions and makes a great addition to any Engineering room. Stop looking around for something that will work, and reach for your Dee Electronics Cable Tie Kit. To order yours, please send an email to MyFeedback@Dee-inc.com with “FREE Cable [...]
Category : Solution Kits
August 28th , 2011 → 7:58 am @ admin2
PC Edge Mount RF connector with all the advantages a designer could want. It edge-mounts to the board, which offers the lowest profile and utilizes very little PCB real estate. It lends itself to surface-mount and through-hole soldering techniques. There are versions for IR and convection reflow soldering. Because the connector locks into place both [...]
Category : Solution Kits
May 23rd , 2011 → 9:33 am @ admin2
DEE has helped us with locating solutions to long lead time parts. They have also offered multiple options for problem suppliers with spec sheets and samples. DEE responds very quickly, and provides great service. I highly recommend Dee Electronics.” Vahid Ellig, Embedded Design Engineer
Category : Client Testimonials - Engineers / Testimonials
March 25th , 2011 → 7:59 am @ admin2
I have found Dee Electronics to be a valuable asset to our design team, as they offer multiple solutions. They have not only supplied options for our design applications, but also provided data sheets and samples. This was all done in a very timely manner. I highly recommend Dee Electronics to anyone.” Scott Eichhorn, Engineer
Category : Client Testimonials - Engineers / Testimonials
August 24th , 2010 → 10:49 am @ admin2
This kit contains the most popular sizes from 5mm – 12mm in width. This contains terminal blocks that will handle from 22AWG – 2AWG wire. They have screw clamp connections, and have all the approvals you will need. These blocks range from 600 volt and 25 amps up to 600 volt at 115 amps. VDE [...]
Category : Solution Kits
March 11th , 2010 → 4:25 pm @ admin2
Dee has created a limited number of solution kits containing a variety of handles, caps, plugs, inserts, feet, and knobs. Not technical stuff, but these are items that you have to have to finish your design. They are high quality, low cost, and immediately available. If you would like to receive this Finishing Products Solution [...]
Category : Solution Kits
Subscribe to our Newsletter
