Browsing Tag »Sensors
June 23rd ,
2010 →
12:37 pm
@
admin2
This In-line Vibration Transmitter installs in-line with any industrial accelerometer, and converts the vibration signal to a 4-20 mA velocity output that can be trended with today’s PLC, DCS and SCADA systems. Its sleek design installs right into the cable run, no DIN rails, cabinets or special power required. With a three pin output connector, [...]
Category :
Engineers Solutions Articles / Sensors / Technical Articles
April 21st ,
2010 →
1:39 pm
@
admin2
Free Whitepaper Report. Dee has written a white paper report that covers the most pertinent information that you should have when selecting a Proximity Sensor. There are a lot of technology choices out there. This report provides a good foundation to dial in on the correct part for your application. If you would like a [...]
Category :
Engineering and Technical White Papers / White Papers
April 12th ,
2010 →
3:06 pm
@
admin2
Flow Sensors Tilt & Vibration Sensors Non-Amplified Photomicrosensors Pressure Sensors
Category :
April 12th ,
2010 →
2:45 pm
@
admin2
Dee distributes and provides value-added services for Omron to OEMs (Original Equipment Manufacturers), CMs (Contract Manufacturers), and supports Purchasing Agents, Buyers, Engineers, and Supply Managers to find solutions and exceed their goals. If you are an existing client of DEE, you can check our Omron inventory via your custom extranet portal or via DeeCommerce. If [...]
Category :
March 19th ,
2010 →
4:10 pm
@
admin2
This is an excellent report which covers the data requirements, economic considerations, and application factors that should be considered when selecting the right Temperature Sensor. If you would like a Free Copy of this Report, just send an email to MyFeedback@dee-inc.com, with “Temp Sensor Report” in the subject line, and be sure to include your [...]
Category :
Engineering and Technical White Papers / White Papers
March 19th ,
2010 →
4:10 pm
@
admin2
A ¾” (19mm) bimetal disc thermostat offers proven reliability in a versatile, cost-effective design. The snap action of the temperature sensing bimetal disc provides high-speed contact separation, resulting in exceptional life characteristics at electrical loads up to 25 amps at 240VAC. A wide variety of terminal and mounting configurations are available for maximum design flexibility. [...]
Category :
Sensors / Technical Articles
February 18th ,
2010 →
11:21 am
@
admin2
-20°F to 150°F, Manual Reset HVAC Pressure Switch Features and Overview Trip-free manual reset Maintenance-free design Single-pole, single-throw, normally closed contacts Factory calibrated pressure set points Hermetically sealed sensor The 29PS HVAC pressure switch utilizes a snap-acting stainless steel Klixon disc that reverses its curvature when pressurized above a customer specified actuation pressure. When the [...]
Category :
Product Releases / Sensata / Sensors
February 18th ,
2010 →
9:32 am
@
admin2
-10°C to 85°C, Automatic Reset HVAC Pressure Switch Features and Overview Electrically rated up to 480 Vac High current capability Capable of 2.5 million cycles (requires Sensata/customer specification closure and validation testing before application approval) A breakthrough in Sensata Technologies’ pressure switch technology enables direct line break capability in applications that have been traditionally controlled [...]
Category :
Product Releases / Sensata / Sensors
February 15th ,
2010 →
3:24 pm
@
admin2
-20°F to 275°F, Automatic Reset HVAC Pressure Switch Features and Overview Single pole, single throw normally open or closed contacts Factory calibrated pressure setpoints Hermetically sealed sensor Enviornmentally sealed or vented switch Electrically rated to 600Vac (45PS) High current switch (up to 13FLA) for direct motor control Product Uses Appropriate for a Wide Range of [...]
Category :
Product Releases / Sensata / Sensors
January 22nd ,
2010 →
9:02 am
@
admin2
-20°F to 150°F, Automatic Reset Pressure Switch Features and Overview Epoxy-less seal Flexible range of set-points and tolerances Factory calibrated fixed set-points Single-pole, single-throw switch; normally open or closed contacts Hermetically sealed sensor The PS80 is an automatic reset HVAC pressure switch designed to meet a broad variety of application requirements by offering a wide [...]
Category :
Product Releases / Sensata / Sensors
