Browsing Tag »Space Savings
March 18th ,
2009 →
11:52 am
@
admin2
In order to meet engineer’s needs of compact and thinner LEDs, Dee Electronics is excited to introduce a new surface-mount LED with an improved 0.25mm package height. Comparing to the standard package sizes (0.8~1.1mm height) in the LED marketplace, this new series provides more flexibility to designers to incorporate these LEDs into slimmer products that will enhance the overall product appearance. [...]
Category :
Engineers Solutions Articles / Lighting Products/Opto/LEDs / Technical Articles
February 17th ,
2009 →
11:25 am
@
admin2
One of the latest additions to the large range of battery holders is an open frame style for CR123A size cells. First designed for equipment requiring extended life in high drain applications such as LED torches, film cameras and digital cameras, the characteristics of this high power, light weight cell make it an ideal choice [...]
Category :
Engineers Solutions Articles / Power Supplies, Batteries & Accessories / Technical Articles
February 17th ,
2009 →
11:25 am
@
admin2
These new relays are designed to perform under the most demanding environmental conditions of temperature, altitude, shock, vibration, and salt spray. Meeting the requirements of Mil-R-6106, these hermetically sealed, non-latching relays offer a 50-A switching capability in a compact package of only one cubic inch in size and weighing less than 90 grams. This compact [...]
Category :
Engineers Solutions Articles / Switches & Relays / Technical Articles
January 13th ,
2009 →
1:51 pm
@
admin2
This remarkably compact Electronic Circuit Protector is just 2.76” H by 0.5“ W, and allows direct mounting on a 35 mm din rail. It combines electronic trip characteristics and active current limitation to allow selective disconnection of loads connected to 24VDC power supplies. Selective load protection prevents complete shutdown of the system by quickly disconnecting [...]
Category :
Engineers Solutions Articles / Heat & Circuit Protection / Technical Articles
January 13th ,
2009 →
1:51 pm
@
admin2
This 0.25mm pitch version is the smallest FPC connector on the market today. It saves up to 40 percent of space in mobile devices. Available from 21 to 39 circuits, the SMT ZIF terminal design prevents cable/connector contact during insertion, protects against wear on the FPC contact pads, and ensures secure electrical contact even if [...]
Category :
Engineers Solutions Articles / Interconnect Products / Technical Articles
December 9th ,
2008 →
9:08 am
@
admin2
These new trendy circuit breakers are available in 1-, 2-, or 3-pole arrangements. Their compact form and attractive design really make them stand out. The rocker-actuating switch can be supplied either with or without illumination, in your choice of 5 bright colors, and with various legends or customer-specific symbols. The breakers have been designed for [...]
Category :
Engineers Solutions Articles / Heat & Circuit Protection / Technical Articles
December 9th ,
2008 →
9:08 am
@
admin2
This new cable-sealed, 1-by-2 connection system is designed to support both low-level signal and power applications up to 22.0A for small circuit size applications where space is a premium. Based on the 1.50mm (.059”) width ISO blade-type terminal system, this connection system offers increased sealing reliability for a large range of SAE wire gauges (14 [...]
Category :
Engineers Solutions Articles / Interconnect Products / Technical Articles
December 9th ,
2008 →
9:08 am
@
admin2
This solid state motor starter combines the functionality of four separate devices in one. The 4-in-1 replaces the need for two contactors for reversing motors or redundancy applications. In addition to replacing contactors, this product has integrated motor overload protection to allow for use in other starter applications. 4-in-1 describes the four different functional areas [...]
Category :
Engineers Solutions Articles / Interconnect Products / Technical Articles
December 9th ,
2008 →
9:08 am
@
admin2
Dee Electronics is pleased to introduce the latest addition to our Thermal Circuit Protector line. Designed for industry standard 0.550 × 1.125 mounting hole, this series is a switch and circuit protector in one small, compact package. This combo-device eliminates the need for both a switch and thermal circuit protector on customer panels. By using [...]
Category :
Engineers Solutions Articles / Heat & Circuit Protection / Switches & Relays / Technical Articles
November 17th ,
2008 →
8:48 am
@
admin2
The value and functionality of these screw connection terminal blocks has just increased with the addition of knife disconnect, feed-through, and component blocks in 2.5 mm. The compact design with uniform dual-bridge channel delivers distribution functionality quickly and effectively. The base block accommodates disconnect, component and fuse plugs, while saving valuable space on the DIN [...]
Category :
Engineers Solutions Articles / Interconnect Products / Technical Articles
