Browsing Tag »Tyco Electronics
June 26th ,
2011 →
2:34 pm
@
admin2
Useful for high-rate-discharge battery applications at ratings above 30VDC/30A such as cordless power tools, e-bikes, and back-up power supplies. This technology uses a new hybrid circuit protection approach that combines a bimetal protector in parallel with a polymeric positive temperature coefficient (PPTC) device. This integrated solution provides resettable overcurrent protection and utilizes the low resistance [...]
Category :
Engineers Solutions Articles / Heat & Circuit Protection / Technical Articles
June 7th ,
2011 →
9:22 am
@
admin2
Finally—the SAE compliant connection system solution from the leaders in connections for commercial vehicles. This is the solution for all your lighting needs! Technical Features Plug Assembly 2 and 3 position molded plugs Interface seal Secondary lock for plug and cap Wire dress cover (optional) Cap Assembly 2 and 3 position molded caps Secondary lock [...]
Category :
Interconnect Products / Product Releases / Tyco Electronics
May 23rd ,
2011 →
9:33 am
@
admin2
The 0201-sized SESD device’s miniature footprint is approximately 70% smaller than prior generation 0402-sized devices and helps provide protection and improve reliability of portable electronics such as mobile phones, MP3 players, PDAs and digital cameras. The miniature footprint offers designers flexibility in space-constrained applications. Bi-directional operation allows placement on the PCB without orientation constraint and [...]
Category :
EMI/Filters / Engineers Solutions Articles / Technical Articles
April 18th ,
2011 →
12:11 pm
@
admin2
The front style terminal block plug has the wire entry cavity and the activating screw head on the same plane which is parallel to the plug-in direction. These plugs, with 5.0 mm and 5.08 mm centerline spacing, will mate to industry standard vertical and right angle headers. Applications: industrial controls, HVAC controls, communications equipment, field [...]
Category :
Engineers Solutions Articles / Interconnect Products / Technical Articles
March 25th ,
2011 →
7:59 am
@
admin2
Now available is an IP65/67 field-installable Industrial Ethernet RJ-45 push-pull connector. Utilizing a common core design, the product can be applied in the field without the need for any tools. This significantly reduces installation time and costs. Designed for use in harsh industrial environments, such as sealed automation units, decentralized applications, cabinet-outlets, manufacturing cells and [...]
Category :
Engineers Solutions Articles / Interconnect Products / Technical Articles
February 18th ,
2011 →
10:16 am
@
admin2
The integrated device helps provide complete circuit protection for electronics with USB ports, and meets suspend-mode power consumption requirements for USB 3.0. A major advantage of the USB 3.0 specification is the increased operating current it allows devices to consume (900mA vs 500mA in USB 2.0). As more and more mobile devices adopt the USB [...]
Category :
Engineers Solutions Articles / Heat & Circuit Protection / Technical Articles
January 23rd ,
2011 →
3:56 am
@
admin2
These devices will help vehicle manufacturers meet industry safety and reliability standards, reduce system cost, and improve the efficiency and reliability of electronics designs. The automotive-grade PolySwitch devices have been tested to follow the guidelines of the automotive industry’s AEC-Q200 standard for electronic components. Available in footprints as small as 1206, the devices provide current [...]
Category :
Engineers Solutions Articles / Heat & Circuit Protection / Technical Articles
January 21st ,
2011 →
10:21 am
@
admin2
Dee has a limited number of fully insulated disconnect terminal kits. This kit includes both the male and female terminals, ranging from 10-22 AWG, or better known as red/yellow/blue. The terminals are nylon-insulated with funnel entry for easy insertion of wire. To order yours today, you can send an email to MyFeedback@Dee-inc.com with “Free Fully [...]
Category :
Solution Kits
December 21st ,
2010 →
10:21 am
@
admin2
This new Industrial Mini I/O connector system features two points of contact to maintain performance and increase reliability in high vibration environments. The compact connector includes a latching system designed to protect the plug from pull-out during high vibration or collision. This new product meets the stringent demands of industrial devices. The rigid latching system [...]
Category :
Engineers Solutions Articles / Interconnect Products / Technical Articles
November 28th ,
2010 →
12:16 pm
@
admin2
This product terminates 18 through 24 AWG solid and stranded wire, utilizing insulation displacement technology to eliminate the laborintensive task of pre-stripping wires and soldering. The robust design of the IDC SSL connector suits harsh environments in the solid state lighting industry. Specific LED applications include: lighting controls, general illumination fixtures, and interconnection of strings [...]
Category :
Engineers Solutions Articles / Interconnect Products / Technical Articles
